Use Fortinet FCP_FMG_AD-7.4 Dumps To Succeed Instantly in FCP_FMG_AD-7.4 Exam
Ultimate Guide to FCP_FMG_AD-7.4 Dumps - Enhance Your Future Career Now
NEW QUESTION # 14
What will be the result of reverting to a previous revision version in the revision history?
- A. It will generate a new version ID and remove all other revision history versions.
- B. It will tag the device settings status as Auto-Update.
- C. It will modify the device-level database.
- D. It win install configuration changes to managed device automatically.
Answer: C
NEW QUESTION # 15
Exhibit.
Which two statements about the output are true? (Choose two.)
- A. The latest revision history for the managed FortiGate does not match the device-level database.
- B. Configuration changes directly made on FortiGate have been automatically updated to the device-level database.
- C. The latest revision history for the managed FortiGate does match the FortiGate running configuration.
- D. Configuration changes have been installed on FortiGate, which means the FortiGate configuration has been changed.
Answer: A,C
NEW QUESTION # 16
An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package. Fortinet. in the custom ADOM1. What happens to the Fortinet policy package when it is created?
- A. The global policy package is automatically assigned.
- B. You must reapply the global policy package to ADOM1.
- C. You can select the option to assign the global policies.
- D. You must assign the global policy package from the global ADOM.
Answer: A
NEW QUESTION # 17
Refer to the exhibit.
An administrator has created a firewall address object that is used in multiple policy packages for multiple FortiGate devices in an ADOM.
After the installation operation is performed, which IP/netmask is shown on FortiManager for this firewall address object for devices without a Per-Device Mapping set?
- A. 192.168.1.0/24
- B. FortiManager replaces the address object to none.
- C. FortiManager generates an error for each FortiGate without a per-device mapping defined for that object.
- D. 192.168.1.0/28
Answer: D
NEW QUESTION # 18
Exhibit.
Given the configuration shown in the exhibit, which two statements are true? (Choose two.)
- A. An administrator can also lock the Local-FortiGate_root policy package.
- B. FortiManager is in workflow mode.
- C. The FortiManager ADOM is locked by the administrator.
- D. The FortiManager ADOM workspace mode is set to Normal
Answer: A,B
NEW QUESTION # 19
Which two items are included in the FortiManager backup? (Choose two.)
- A. Firmware images
- B. FortiGuard database
- C. All devices
- D. Flash configuration
Answer: C,D
Explanation:
FortiManager backups include:
* A. All devices- This includes all device configurations managed by FortiManager, such as firewall policies, objects, and other settings.
* D. Flash configuration- This consists of local FortiManager configurations stored in flash memory, such as system settings, scripts, and other locally-stored configurations.
Options B and C are incorrect because:
* B (Firmware images)are not typically included in a FortiManager backup. Firmware images are usually stored separately and managed through a different process.
* C (FortiGuard database)is incorrect as the FortiGuard database, which contains threat intelligence and security signatures, is not part of the standard FortiManager backup.
FortiManager References:
* Refer to FortiManager 7.4 Administrator Guide: Backup and Restore Processes.
NEW QUESTION # 20
Refer to the exhibit.
What can you conclude from the failed installation log shown in the exhibit?
- A. Policy ID 2 will not be installed.
- B. Policy ID 2 is installed without a source address.
- C. Policy ID 2 is installed in the disabled state.
- D. Policy ID 2 is installed without the remote user student.
Answer: D
NEW QUESTION # 21
Refer to the exhibit.
An administrator is about to add the FortiGate device to FortiManager using the discovery process.
FortiManager is operating behind a NAT device, and the administrator configured the FortiManager NATed IP address under the FortiManager system administration settings.
What is the expected result?
- A. During discovery. FortiManager sets the NATed device IP address on FortiGate.
- B. During discovery, FortiManager sets the FortiManager NATed IP address on FortiGate.
- C. During discovery, FortiManager sets both the FortiManager NATed IP address and NAT device IP address on FortiGate.
- D. During discovery. FortiManager uses only the FortiGate serial number to establish the connection.
Answer: B
Explanation:
When adding a FortiGate device to FortiManager that is operating behind a NAT device, and the FortiManager NATed IP address is configured under the system administration settings, FortiManager will set the FortiManager NATed IP address on the FortiGate device during the discovery process. This ensures that the FortiGate knows how to reach the FortiManager through the NAT device.
Options A, B, and C are incorrect because:
* Ais incorrect because the discovery process also requires knowing the NATed IP to establish a connection, not just the serial number.
* Bis incorrect because FortiManager does not set the NAT device's IP address on the FortiGate.
* Cis incorrect because it implies that the NAT device IP is set on FortiGate, which is not the expected outcome.
FortiManager References:
* Refer to FortiManager 7.4 Administrator Guide: Device Discovery and Management with NAT.
NEW QUESTION # 22
Exhibit.
What is true about the objects highlighted in the image?
- A. They cannot be created in the global database ADOM.
- B. They can be set to optional or required.
- C. They can be used as variables in scripts.
- D. They are available across all ADOMs by default.
Answer: C
Explanation:
The objects highlighted in the image (DMZ_SUBNET, ISP1_SUBNET, LAN_SUBNET) aremetadata variables.
* C.They can be used as variables in scripts.
* These metadata variables are placeholders that can be used in FortiManager scripts to dynamically insert specific values, enabling script flexibility and scalability across multiple devices or ADOMs.
Options A, B, and D are incorrect because:
* Asuggests optional or required settings, which do not apply to metadata variables.
* Bimplies they are available across all ADOMs by default, which is not always the case.
* Dstates they cannot be created in the global database ADOM, but metadata variables are typically managed within ADOMs and can be utilized globally based on specific configurations.
FortiManager References:
* Refer to FortiManager 7.4 Administrator Guide: Using Metadata Variables and Script Management.
NEW QUESTION # 23
An administrator configures a new OSPF area on FortiManager and has not yet pushed the changes to the managed FortiGate device. In which database will the configuration be saved?
- A. Device-level database
- B. Configuration-level database
- C. ADOM-level database
- D. Revision history database
Answer: A
NEW QUESTION # 24
Which two items does an FGFM keepalive message include? (Choose two.)
- A. FortiGate uptime
- B. FortiGate IPS version
- C. FortiGate configuration checksum
- D. FortiGate license information
Answer: B,C
NEW QUESTION # 25
Refer to the exhibit.
An administrator has created a firewall address object that is used in multiple policy packages for multiple FortiGate devices in an ADOM.
After the installation operation is performed, which IP/netmask is shown on FortiManager for this firewall address object for devices without a Per-Device Mapping set?
- A. 192.168.1.0/24
- B. FortiManager replaces the address object to none.
- C. 192.168.1.0/28
- D. FortiManager generates an error for each FortiGate without a per-device mapping defined for that object.
Answer: A
Explanation:
* Option B: 192.168.1.0/24is the correct answer. In FortiManager, when a firewall address object is defined and used across multiple policy packages without any Per-Device Mapping, the default value configured in the object definition (192.168.1.0/255.255.255.0) is applied to all devices. The exhibit shows that the address objectLOCAL_SUBNEThas a default IP/netmask of192.168.1.0/24. Therefore, FortiManager will use this default value for any FortiGate device that does not have a specific Per- Device Mapping configured.
* Explanation of Incorrect Options:
* Option A: FortiManager generates an error for each FortiGate without a per-device mapping defined for that objectis incorrect because FortiManager does not generate an error when a Per-Device Mapping is not set. Instead, it uses the default value provided in the object definition.
* Option C: 192.168.1.0/28is incorrect because the default value is192.168.1.0/24, as seen in the exhibit, not/28.
* Option D: FortiManager replaces the address object to noneis incorrect because FortiManager does not replace address objects to "none" when a Per-Device Mapping is missing; it uses the default value instead.
FortiManager References:
* Refer to the FortiManager 7.4 Administration Guide, specifically in sections related to "Address Object Management" and "Per-Device Mapping," which detail the behavior of address objects without specific device mappings.
NEW QUESTION # 26
In the event that one of the secondary FortiManager devices fails, which action must be performed to return the FortiManager HA manual mode to a working state?
- A. The FortiManager HA state transition is transparent to administrators and does not require any reconfiguration.
- B. Reconfigure the primary device to remove the peer IP of the failed device.
- C. Reboot the failed device to remove its IP from the primary device.
- D. Manually promote one of the working secondary devices to the primary role, and reboot the old primary device to remove the peer IP of the failed device.
Answer: D
Explanation:
When a secondary FortiManager device fails in HA manual mode, an administrator must manually promote one of the working secondary devices to the primary role and reboot the old primary device to remove the peer IP of the failed device. This ensures the HA configuration is updated correctly, and the network remains resilient.
Options A, B, and D are incorrect because:
* A suggests the transition is transparent, which is true only in automatic mode, not in manual mode.
* B and D imply simpler steps that do not fully address the HA reconfiguration process in manual mode.
FortiManager References:
* Refer to FortiManager 7.4 High Availability (HA) Configuration Guide: Manual Mode Configuration and Failover Procedures.
NEW QUESTION # 27
An administrator created a new global policy package that includes header and footer policies and then assigned it to an ADOM. What are two outcomes of this action? (Choose two.)
- A. After you assign the global policy package to an ADOM. the impacted policy packages become hidden in that ADOM.
- B. You must manually move the header and footer policies after the policy assignment.
- C. You can edit or delete all the global objects in the global ADOM.
- D. To assign another global policy package later to the same ADOM. you must unassign this policy first.
Answer: C,D
NEW QUESTION # 28
Which output is displayed right after moving the ISFW device from one ADOM to another?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 29
Refer to the exhibit which shows the Download Import Report.
Why is FortiManager failing to import firewall policy ID 1?
- A. Policy ID 1 is configured from the interface any to port6. FortiManager rejects the request to import this policy because the any interface does not exist on FortiManager
- B. Policy ID 1 has an address object that already exists in the ADOM database with any as the interface association, and conflicts with the address object interface association locally on FortiGate.
- C. Policy ID 1 for this managed FortiGate already exists on FortiManager in the policy package named Remote-FortlGate.
- D. Policy ID 1 does not have the ADOM Interface mapping configured on FortiManager.
Answer: C
NEW QUESTION # 30
Exhibit.
Which two statements about the output are true? (Choose two.)
- A. The latest revision history for the managed FortiGate does not match the device-level database.
- B. Configuration changes directly made on FortiGate have been automatically updated to the device-level database.
- C. Configuration changes have been installed on FortiGate, which means the FortiGate configuration has been changed.
- D. The latest revision history for the managed FortiGate does match the FortiGate running configuration.
Answer: A,C
Explanation:
The output indicates that:
* The device's status is shown as "dev-db: modified" and "conf: in sync," which means that there is a difference between the device-level database on FortiManager and the actual running configuration of the managed FortiGate. Therefore, the latest revision history for the managed FortiGate does not match the device-level database, which confirms statement A as true.
* "dm: retrieved" status indicates that configuration changes have been installed on the FortiGate, confirming statement B as true. It also means that the configuration has been modified, and those changes have been pulled from the FortiGate to the FortiManager.
Statements C and D are incorrect because:
* C is incorrect as it implies an automatic update, whereas "dev-db: modified" indicates changes have been made on the FortiGate device that are not yet reflected in the FortiManager's database.
* D is incorrect because "dev-db: modified" shows that the device-level database and running configuration are not in sync.
FortiManager References:
* Refer to the FortiManager 7.4 Administrator Guide: Device Manager > Device Status to understand the
"dev-db" and "conf" status meanings.
NEW QUESTION # 31
Which two items are included in the FortiManager backup? (Choose two.)
- A. Firmware images
- B. FortiGuard database
- C. All devices
- D. Flash configuration
Answer: C,D
NEW QUESTION # 32
Refer to the exhibit.
An administrator is about to add the FortiGate device to FortiManager using the discovery process.
FortiManager is operating behind a NAT device, and the administrator configured the FortiManager NATed IP address under the FortiManager system administration settings.
What is the expected result?
- A. During discovery. FortiManager sets the NATed device IP address on FortiGate.
- B. During discovery, FortiManager sets the FortiManager NATed IP address on FortiGate.
- C. During discovery, FortiManager sets both the FortiManager NATed IP address and NAT device IP address on FortiGate.
- D. During discovery. FortiManager uses only the FortiGate serial number to establish the connection.
Answer: B
NEW QUESTION # 33
Refer to the exhibit.
Given the configuration shown in the exhibit, which two conclusions can you draw from the installation targets in the Install On column? (Choose two.)
- A. Policy seq.# 2 will not be installed on the Local-FortiGate root VDOM because there is no root VDOM in the Installation Target
- B. Policy seq.S will be installed on all managed devices and VDOMs that are listed under Installation Targets
- C. Policy seq.# 1 will be installed on the ISFW device root[NAT] and Student[NAT] VDOMs only.
- D. Policy seq.# 3 will be skipped because no installation targets are specified.
Answer: B,C
NEW QUESTION # 34
Which statement about thepolicy lock feature on FortiManager is true?
- A. Policy locking is available in workspace normal mode.
- B. Administrators in the approval group can work concurrently on a locked policy.
- C. When a policy is locked, the ADOM that contains it is also locked.
- D. Locking a policy takes precedence over a locked ADOM.
Answer: A
NEW QUESTION # 35
......
Fortinet Dumps - Learn How To Deal With The Exam Anxiety: https://www.testkingit.com/Fortinet/latest-FCP_FMG_AD-7.4-exam-dumps.html
Now, get the Latest FCP_FMG_AD-7.4 dumps in Test Engine from : https://drive.google.com/open?id=1IQ5lDTDB1ecKj6x8tAXLvcmvTstcz8VD