[Sep-2021] Aruba-ACMP HPE6-A71 Exam Practice Dumps
2021 HPE6-A71 Premium Files Test pdf - Free Dumps Collection
NEW QUESTION 65
An administrator configures an ArubaOS-Switch for per-user tunneled node. Which protocols does the switch use to establish and maintain a connection with the Aruba Mobility Controller (MC)? (Select two.)
- A. PAPI
- B. SSL
- C. GRE
- D. IPSec
Answer: A,C
NEW QUESTION 66
Refer to the exhibit.
An administrator examines theconfiguration of an AP from apboot mode shown in the exhibit.
What can the administrator determine from the configuration?
- A. RAP terminated on a Mobility Master.
- B. AP terminated on a Mobility Controller in a cluster.
- C. RAP terminated on a stand-alone controller.
- D. AP terminated on a non-cluster Mobility Controller.
Answer: B
NEW QUESTION 67
An administrator has a cluster ofAruba Mobility Controllers (MCs). The administrator wants to manually reboot one of the controllers.
Before rebooting, which command should the administrator use to move the APs?
- A. apmove
- B. active-ap-lb
- C. active-ap-rebalance
- D. lc-cluster move ap
Answer: D
NEW QUESTION 68
Refer to the exhibit.
The administrator expects the AP to connect to a cluster, but the AP fails to connect. The administrator examines the configuration of an AP from apboot mode shown in the exhibit. What can the administrator determine about the configuration of the AP?
- A. The AP is configured as a RAP to terminate on a stand-alone controller.
- B. The AP is configured as a RAP to terminate on a Mobility Master.
- C. The AP is configured to terminate on a non-cluster Mobility Controller.
- D. The AP is configured to terminate on a Mobility Controller in a cluster.
Answer: D
NEW QUESTION 69
An administrator moves an AP from Campus 1 to Campus 2. At the Campus 2, the moved AP does not connect to a controller and download an AP Group configuration.
Which process should the administrator perform to reset the AP back to its initial default state?
- A. From apboot mode, execute factory_reset.
- B. From the controller's ArubaOS, execute write erase all.
- C. From apboot mode, execute purgeenv.
- D. From the AP's ArubaOS CLI, execute write erase all.
Answer: C
NEW QUESTION 70
Refer to the exhibit.
What is true about the configuration shown in the exhibit?
- A. This is an ArubaOS controller configured for per-user tunneled node.
- B. This is an ArubaOS controller configured for per-user tunneled node.
- C. This is an ArubaOS-Switch configured for per-port tunneled node.
- D. This is an ArubaOS-Switch configured for per-user tunneled node.
Answer: C
NEW QUESTION 71
An administrator configures Unified Communications and Collaboration (UCC) heuristics mode on an Aruba Mobility Master (MM). What should be modified in order to send items such as VoIP sessions and monitored information about adds, updates, deletions, and periodic snapshots of those VoIP sessions on the MM or the Aruba Mobility Controller (MC)?
- A. OpenFlow Controller profile
- B. Mgmt Config profile
- C. Skype ALG Configuration profile
- D. OpenFlow profile
Answer: B
NEW QUESTION 72
An administrator implements a standalone controller that runs ArubaOS 8.x. Which feature should the administrator configure to optimize the RF operation for the company's WLAN?
- A. Clustering
- B. ARM
- C. Zones
- D. AirMatch
Answer: B
NEW QUESTION 73
An administrator needs to authenticate users connected to an ArubaOS-Switch where the switch authenticates the user, assigns the firewall policies to the user, and processes some of the users' traffic. Which connection method should the administrator configure on the ArubaOS-Switch?
- A. Per-user tunneled node
- B. VLAN tunneled mode
- C. Split-tunneled mode
- D. Per-port tunneled node
Answer: D
NEW QUESTION 74
An administrator implements the MultiZone feature anduses two clusters that utilize CPSec. A primary and a data zone are created. MultiZone APs successfully build sessions to the primary cluster but fail to establish sessions to the data zone cluster.
What must the administrator do to solve this problem?
- A. Use different AP Group names for the twozones.
- B. Enable CPSec in the MultiZone profile for both the primary and data zone.
- C. Add the MultiZone APs to the data zone's CPSec whitelist.
- D. Enable MultiZone booting in the MultiZone AP apboot configuration mode.
Answer: A
NEW QUESTION 75
On the Aruba Mobility Master (MM), when is an AP configured to act as a Mesh Portal or Mesh Point?
- A. when the APs are provisioned
- B. when the mesh cluster profile is created
- C. when the mesh radio profile is created
- D. at the time of the AP's apboot mode CLI
Answer: A
NEW QUESTION 76
A VIA client tries to initially connect to corporate office controller through an intermediate firewall. However, the VPN connection fails. The administrator examines the firewall rules and determines that rules for UDP
4500 and UDP 500 are configured.
Which additional protocol must be allowed in the firewall rules to resolve this connection failure?
- A. UDP 8200
- B. TCP 389
- C. TCP 993
- D. UDP 4500
Answer: D
NEW QUESTION 77
An administrator troubleshoots a roaming problem where a user loses connectivity to the network during the roaming process. To help troubleshooting this problem, which device or devices in a wireless network initiates the roaming process?
- A. Both the client and the controller
- B. The AP
- C. The Controller
- D. The Client
Answer: D
NEW QUESTION 78
An administrator configures AirGroup policies to define which Apple services are visible and available to wireless users in a campus WLAN. However, the policies are not being enforced.
Where mustthe administrator enable the AirGroup functionality on the Mobility Master (MM) so that the policies will be in effect?
- A. At the controller level in the Managed Network hierarchy
- B. At the Mobility Master hierarchy
- C. At the Access Points level in theManaged Network hierarchy
- D. At the global Managed Network hierarchy
Answer: B
NEW QUESTION 79
What can be determined from the command output shown below?
- A. The command was executed on the standby Mobility Master (MM).
- B. The synchronized data is protected by VRRP.
- C. The synchronization period is at its default value.
- D. The other Mobility Master (MM) is the active license server.
Answer: C
NEW QUESTION 80
Which methods can be used to configure RAP redundancy when connected to two redundant Aruba Mobility Controllers (MCs) in the DMZ? (Select two.)
- A. Active and Standby AAC.
- B. Virtual IP address of the two controllers.
- C. Primary and backup LMS IP addresses.
- D. IPSec High Availability (HA) between two cluster members.
- E. AirWave direction to RAPs redundant Mobility Controllers.
Answer: A,E
NEW QUESTION 81
Refer to the exhibit.
An administrator wants to centralize administrative access to the Aruba Mobility Controllers (MC) and Mobility Master (MM). ClearPass is set up and the preferred authentication protocols is TACACS+. Where should the administrator perform this configuration in the MM hierarchy shown in the exhibit?
- A. At the two campus levels
- B. At both the Mobility Master and Managed Network levels
- C. At the Managed Network level
- D. At the controller levels
Answer: B
NEW QUESTION 82
Refer to the exhibit.
An administrator sets up a cluster of Aruba Mobility Controllers (MCs). What can the administrator determine about the cluster from the command output shown in the exhibit?
- A. AP load balancing is enabled.
- B. This is an L2-connected cluster.
- C. User load balancing is enabled.
- D. This is an L3-connected cluster.
Answer: C
NEW QUESTION 83
An administrator supports an Aruba wireless network. The administrator configures as AAA profile referenced in a WLAN profile, where:
* The initial role assigned in the AAA profile is logon
* The MAC authentication default role is guest
* The 802.1X authentication role is authenticated
ClearPass is used to verify the 802.1X user credentials. A user authenticates and is assigned the authenticated default role instead of the role assigned in the ClearPass serverconfiguration.
What must the administrator do so that the ClearPass role is assigned to the user?
- A. Select the Server-derived roles User Role in the AAA profile.
- B. Select the Server-derived roles in the Server Group section.
- C. Create the Download Role from CPPM User Rule.
- D. Verify the role exists on the controller.
Answer: B
NEW QUESTION 84
An administrator deploys an AP at a branch office. The branch office has a private WAN circuit that provides connectivity to a corporate officecontroller. An Ethernet port on the AP is connected to a network storage device that contains sensitive information. The administrator is concerned about sending this traffic in clear-text across the private WAN circuit.
What can the administrator do to prevent this problem?
- A. Convert the campus AP into a RAP.
- B. Redirect the wired port traffic to an AP-to-controller GRE tunnel.
- C. Enable IPSec encryption on the AP's wired ports.
- D. Enable AP encryption for wired ports.
Answer: C
NEW QUESTION 85
In the WebUI of an Aruba Mobility Controller (MC), where can an administrator generate a tech support file that the Aruba Technical Support team can use to help customers?
- A. Diagnostics> Technical Support> System Information
- B. Diagnostics>Technical Support> Copy Logs
- C. Maintenance> Copy logs> download logs
- D. Configuration> System> Logging
Answer: C
NEW QUESTION 86
......
Get ready to pass the HPE6-A71 Exam right now using our Aruba-ACMP Exam Package: https://www.testkingit.com/HP/latest-HPE6-A71-exam-dumps.html