Use the best ways of preparing for E-S4HCON2022 Exam Dumps with TestKingsIT SAP E-S4HCON2022 dump PDF [2021]
SAP E-S4HCON2022 exam candidates will surely pass the Exam if they consider the E-S4HCON2022 dumps learning material presented by TestKingsIT.
NEW QUESTION 10
The SUM procedure stops with an error during uptime. How can you identify the current phase, the one in which SUM encountered an error?
There are 2 correct answers to this question.
Response:
- A. Check the system log (transaction SM21) of the SAP system
- B. Check the most recent entries in SAPup.log
- C. Check the messages shown by the SUM UI
- D. Check the most recent entries shown in file sapevt.trc
Answer: B,C
NEW QUESTION 11
You are using the maintenance planner to calculate the required software components for your SAP S4HANA conversion. What do you need to know regarding SUM?
- A. As soon as the next SP level of SUM is available, the current version of SUM passes into "patch on request mode" immediately.
- B. AA
Answer: A
NEW QUESTION 12
What phases of SUM will be executed during an SAP S/4HANA conversion including DMO?
There are 3 correct answers to this question.
Response:
- A. Phase DOWNCONF_DTTRANS
- B. Phases DIFF*
- C. Phases EU_IMPORT*
- D. Phase RUN_RSPTBFIL _ISUTABU
- E. Phase RUN_RSDBSCPY
Answer: A,B,C
NEW QUESTION 13
During the upgrade of your development system, you run into the adjustment of non-dictionary objects handled by transaction SPAU There you find programs that are shown in status "automatic adjustment (green traffic tight). What will happen with these programs when you continue with your upgrade without performing any other actions inside your SAP system?
- A. SUM continues with the next phase and your modifications are lost
- B. SUM continues with the next phase and your modifications are kept as In the start release
- C. Before continuing with the next phase SUM asks for a modification adjustment transport
- D. SUM refuses to continue unless you have marked a transport request as modification adjustment transport
Answer: B
NEW QUESTION 14
You want to use the Custom Code Migration Worklist via Remote Code analysis using the ABAP Test Cockpit (ATC). How can you get the latest content of the simplification database? Please choose the correct answer.
- A. Generate it by analyzing the specific custom code via RFC
- B. Configure it within transaction ATC
- C. Download it from SAP Support Portal
- D. Apply the corresponding SAP note via SAP Note Assistant
Answer: C
NEW QUESTION 15
In ICNV. How database operations synchronized between the source and the target table?
- A. Deletes are directly executed in the target table by delete trigger.
- B. AA
Answer: A
NEW QUESTION 16
You want to use the downtime-optimized data conversion for your SAP S/4HANA conversion. What is the main difference from a standard SAP S/4HANA conversion?
Please choose the correct answer.
Response:
- A. Dedicated application tables are migrated in uptime
- B. TABIMJJPG is executed in uptime
- C. An additional temporary database is used during uptime
- D. The repository is migrated in uptime
Answer: A
NEW QUESTION 17
Which maintenance events are possible with SUM for an SAP system based on AS ABAP 7.40 and above? There are 3 correct answers to this question.
- A. Dual Stack split
- B. Homogenous system copy
- C. Release upgrade
- D. Database migration
- E. Support Package Stack update
Answer: C,D,E
NEW QUESTION 18
You are performing an upgrade with SUM. You are in the BIND_PATCH phase of the roadmap step "Configuration". For some software components you find entries in the "Calculated level" column.
What does the "Calculated level" indicate for those software components?
Please choose the correct answer.
Response:
- A. The SAP Support packages of the Support Package Stack, calculated by the Maintenance Planner
- B. The SAP Support Packages contained in the upgrade media
- C. The SAP Support Packages found in the download directory
- D. The SAP Support Packages that will be bound to the upgrade
Answer: C
NEW QUESTION 19
You are planning to upgrade your SAP ECC 6.07 system running on a single codepage (SCP) to SAP ECC 6.08. What is the recommended option to perform this upgrade?
Please choose the correct answer.
Response:
- A. Perform the Unicode conversion before the upgrade to SAP ECC 6.08.
- B. Perform the upgrade to SAP ECC 6.08 before the Unicode conversion.
- C. Combine the upgrade and the Unicode conversion using the Twin Upgrade &Unicode Conversion (TU &UC) procedure.
- D. Combine the upgrade and the Unicode conversion using the Combined Upgrade &Unicode Conversion (CU &UC) procedure.
Answer: A
NEW QUESTION 20
During a DMO procedure with SUM, after which phase is the repository first available on the target database?
Please choose the correct answer.
Response:
- A. Uptime migration (EU_CLONE_MIG_UT_RUN)
- B. Shadow repository creation (EU_IMPORT*)
- C. Downtime migration (EU_CLONE_MIG_DT_RUN)
- D. ParaUel distribution (PARDIST_SHD)
Answer: A
NEW QUESTION 21
You are performing an S/4HANA conversion of the development system. Which credentials do you use in which system to perform the adjustment of dictionary objects (SPDD)?
Please choose the correct answer.
Response:
- A. Credentials of a named user in the development client of the development system
- B. Credentials of user DDIC in the development client of the development system
- C. Credentials of user DDIC in client 000 of the shadow system
- D. Credentials of a named user in client 000 of the shadow system
Answer: D
NEW QUESTION 22
You want to execute a Unicode Conversion only. Which approach do you need to follow?
Please choose the correct answer.
Response:
- A. SWPM using the Load procedure
- B. SWPM using the Backup / Restore procedure
- C. SUM with DMO
- D. SUM without DMO
Answer: A
NEW QUESTION 23
How does SUM recognize modification adjustment transports from predecessor systems?
Please choose the correct answer.
Response:
- A. By searching for transport requests in the file umodauto.Ist
- B. By searching for transport requests that are assigned to the project SAP_ADJUST
- C. By searching for transport requests in DIR_TRANS, subdirectory "transport"
- D. By searching for transport requests named <SID>K0<number>
Answer: A
NEW QUESTION 24
During an SAP S/4HANA conversion with DMO, which of the following actions take place during the business downtime of the SUM procedure?
There are 3 correct answers to this question.
Response:
- A. Execution of SPDD modification adjustment
- B. Execution of SPAU modification adjustment
- C. Execution of XPRAs and AIMs
- D. Creation of the table structures in the new SAP HANA database
- E. Execution of eCATTs for business validation tests
Answer: B,C,E
NEW QUESTION 25
During the SUM procedure, the phase XPRAS_AIMMRG fails. Where can you most likely see the reason for the error?
There are 2 correct answers to this question.
Response:
- A. In the job log for the corresponding job in SM37 (Job Overview)
- B. In the corresponding R3trans log files of this phase
- C. In the latest log files in the SUM directory, subdirectory ABAP, subdirectory log
- D. In the latest log files in the SUM directory, subdirectory ABAP, subdirectory tmp
Answer: A,C
NEW QUESTION 26
ICNV initialization does 3
- A. Creation of views
- B. Creation of flag
- C. AA
- D. Build index on flag column
Answer: A,B,D
NEW QUESTION 27
......
Full E-S4HCON2022 Practice Test and 55 unique questions with explanations waiting just for you, get it now: https://drive.google.com/open?id=1kjAqtrpMNmenBvcjt5pDY7B1PxkXJZQH
Accurate & Verified Answers As Seen in the Real Exam here: https://www.testkingit.com/SAP/latest-E-S4HCON2022-exam-dumps.html