Latest Success Metrics For Actual H31-311_V2.5 Exam 2024 Realistic Dumps
Updated H31-311_V2.5 Dumps Questions For Huawei Exam
Huawei H31-311_V2.5 : HCIA-Transmission V2.5 is a certification exam designed to test your knowledge and skills in the field of transmission network technologies. HCIA-Transmission V2.5 certification is offered by Huawei, a Chinese multinational technology company, and it is aimed at professionals who are interested in building a career in the telecommunications industry. HCIA-Transmission V2.5 certification demonstrates that the candidate has the skills and knowledge required to design, configure, and troubleshoot transmission systems.
NEW QUESTION # 76
In the case of a 1+1 linear MSP, which of the following switching modes does not require the APS protection protocol full (multiple choice) to be enabled
- A. Single-ended reply mode (correct case management).
- B. Double-ended non-reply mode
- C. Single-ended non-reply pattern
- D. Double-ended reply mode
Answer: A,C
NEW QUESTION # 77
Which of the following is the frame indicated by the VC-4 J1 byte by the AU pointer of the current frame?
- A. None of the above
- B. Current framework
- C. Next frame
- D. Previous frame
Answer: C
NEW QUESTION # 78
The following is the frame structure of the STM-16?
- A. 9*270*1
- B. 9*270*16
- C. 9*270"4
- D. 9*270*64
Answer: B
NEW QUESTION # 79
The1310nm and 1550nm transmission windows are low loss windows. In DWDM systems, only the 1560m transfer window is used. Which of the following is the main cause?
- A. None of the above
- B. The 1550nm wavelength region is suitable for long-distance transmission.
- C. The EDFA operating wavelength flatness region is contained in this window.
- D. The nonlinear effect of the B.1550 nm-wavelength region is small.
Answer: C
NEW QUESTION # 80
The segment overhead of STM-4 is () bytes/frame.
- A. 9*9*8
- B. 9*8"4
- C. 9*8
- D. 9*9*4
Answer: B
NEW QUESTION # 81
output networks require higher costs than belt networks, but provide a more reliable management channel.
- A. True
- B. Error
Answer: A
NEW QUESTION # 82
The number of bit error blocks on each VC4 channel is detected by B3 on the receiving side. At the same time, the information is sent back to the sender via Q, and HP-REI and HP-FEBBE report on the sender.
- A. J(bt-4)
- B. G1 (b5-b8）
- C. K3 (b1-b4)
- D. G1 (b1-b4)
Answer: D
NEW QUESTION # 83
SES: There are 5% or more of the error blocks or at least one defect (OCI/AIS/LCK/IAE/LTC/TIM/PLM) in one second.
- A. True
- B. False
Answer: B
NEW QUESTION # 84
K1 and K2 bytes can send APS switching signaling or indicate that the multiplexed segment signal is invalid.
- A. True
- B. Error
Answer: A
NEW QUESTION # 85
The backplane has two 48V power cords, and each board gets two -48V power supplies from the backplane. After combining the power supply via diodes, the various voltages required for each component are obtained by means of a DC/DC power module and a linear mane swap.
- A. True
- B. Error
Answer: A
NEW QUESTION # 86
Which of the following methods can be used to multiplex low-order ODUK to higher-order ODUk?
- A. Wavelength division multiplexing
- B. Null division multiplexing
- C. Time-division multiplexing
- D. Frequency division multiplexing
Answer: C
NEW QUESTION # 87
In the Windows operating system, the log files of the U2000 program are stored in the () directory of the U2000 installation disk.
- A. /U2000/server
- B. /U2000/client/log
- C. /u2000/server/log
- D. /U2000/Client
Answer: C
NEW QUESTION # 88
Coherent receiver technology uses a local oscillator laser with the same frequency as the received signal to perform coherent processing and recover () information from the received signal. (Multi-quality selection.)
- A. Amplitude
- B. Frequency
- C. Phase
- D. Polarized state
Answer: A,C,D
NEW QUESTION # 89
Which of the following clock operating modes supports the ITU-T G.781 standard? (Multiple choice).
- A. Tracking
- B. Self-curved running
- C. Master/Slave
- D. Hold
Answer: A,B,D
NEW QUESTION # 90
Which of the following statements about the MSP ring is correct? (Multiple choice).
- A. The number of nodes on the MSP ring cannot exceed 16. .
- B. When multiple protection subnets occupy the same port on the same board, "resource sharing" must be reached.
- C. Create a protection sub and select only the SDH network element. Do not select REG or WDM network elements.
- D. is assigned by VC4 means that different VCs4 are assigned to different protection subnets to implement MsPs only in certain channels
Answer: A,B,C,D
NEW QUESTION # 91
When configuring the SXCS single board for the OSN3500, which of the following is the access package of the fully configured substand?
- A. 80G
- B. 156 to pick up the answer
- C. 58.75G
- D. 35G
Answer: B
NEW QUESTION # 92
In the case of SNCP, the board selectively receives the service. Therefore, SNCP can protect services on the line.
- A. True
- B. False
Answer: B
NEW QUESTION # 93
......
Huawei H31-311_V2.5 Certification Exam is a comprehensive exam that requires a high level of technical expertise and knowledge. Candidates who wish to take the exam must have a strong understanding of transmission network technology and be able to apply this knowledge to real-world scenarios. H31-311_V2.5 exam is designed to test an individual's ability to design, deploy, and maintain transmission networks, and candidates must be able to demonstrate their proficiency in these areas to pass the exam.
Full H31-311_V2.5 Practice Test and 200 Unique Questions, Get it Now!: https://www.testkingit.com/Huawei/latest-H31-311_V2.5-exam-dumps.html
Best Value Available Preparation Guide for H31-311_V2.5 Exam: https://drive.google.com/open?id=1daQvSd28PBaKf8I25nF_b00xSYnh-M2D