Latest [Feb 26, 2023] Realistic Verified 300-620 Dumps
Pass Cisco 300-620 Exam Updated 194 Questions
In Conclusion
A variety of preparation materials for the Cisco 300-620 exam makes it possible for everyone to become CCNP Data Center certified. Put all the dedication into the preparation process, and reap the fruits of your efforts soon! Start with the official outline, proceed to the vendor’s training, supplement it with books, and you’ll become a sought-after professional recognized for your competence.
Career Prospects
Passing the Cisco 300-620 exam brings you closer to the CCNP Data Center certification. With any high-class certificate of this vendor, you can stand out from the crowd of your competitors and demonstrate to your potential employer that you have undertaken the relevant training and are aware of the latest network tendencies and technologies. Obtaining this professional-level certification can guarantee you outstanding career prospects. Some of the positions that you can apply for after passing the test are:
- Technical Solutions Architect
- Server Administrator
- Data Center Technician
- Field Engineer
- Data Engineer
- Consulting Systems Engineer
- Systems Engineer
- Network Designer
Moreover, getting the CCNP Data Center certification can be highly beneficial in financial terms. Thus, the average salary for the certificate holders is currently approximately $70,279 per annum. A Network Engineer can earn $109,163 and a Data Engineer can get about $132,020 per year. Depending on your level of experience and the type of the enterprise you work for, you are able to earn as much as $235,000.
Conclusion
Earning a certification is a good opportunity for you to upgrade yourself, and the certificates offered by Cisco can easily boost your marketability. Pass 300-620 exam to improve and validate your skills, improve your confidence, and gain extra recognition for your competence. With its related specialist-level and CCNP accreditations, you can opt for a variety of lucrative jobs, so go for it!
NEW QUESTION 40
Refer to the exhibit.
Which Adjacency Type value should be set when the client endpoint and the service node interface are in a different subnet?
- A. Routed
- B. Unicast
- C. L3
- D. L3Out
Answer: C
NEW QUESTION 41
An engineer must configure RADIUS authentication with Cisco ACI for remote authentication with out-of-band management access. Drag and drop the RADIUS configuration steps from the left into the required implementation order on the right. Not all steps are used.
Answer:
Explanation:
NEW QUESTION 42
An engineer wants to filter the System Faults page and view only the active faults that are present in the Cisco ACI fabric. Which two lifecycle stages must be selected for filtering? (Choose two.)
- A. Soaking
- B. Soaking, Clearing
- C. Raised, Clearing
- D. Retaining
- E. Raised
Answer: C,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/all/faults/guide/b_APIC_Faults_Errors/ b_IFC_Faults_Errors_chapter_01.html
NEW QUESTION 43
Which statement about ACI syslog is true?
- A. Switches send syslog messages directly to the destinations.
- B. Syslog messages are sent to the destination through the spine.
- C. Notifications for different scopes of syslog objects can be sent only to one destination.
- D. All syslog messages are sent to the destination through APIC.
Answer: A
NEW QUESTION 44
Which components must be configured for the BGP Route Reflector policy to take effect?
- A. spine fabric interface overrides and profiles
- B. leaf fabric interface overrides and profiles
- C. pod policy groups and profiles
- D. access policies and profiles
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/4-x/L3-configuration/Cisco- APIC-Layer-3-Networking-Configuration-Guide-401/Cisco-APIC-Layer-3-Networking-Configuration-Guide- 401_chapter_01.html
NEW QUESTION 45
A customer migrates a legacy environment to Cisco ACI. A Layer 2 trunk is configured to interconnect the two environments. The customer also builds ACI fabric in an application-centric mode. Which feature should be enabled in the bridge domain to reduce instability during the migration?
- A. Disable Endpoint Dataplane Learning
- B. Enable Flood in Encapsulation.
- C. Set Multi-Destination Flooding to Flood in BD.
- D. Set Multi-Destination Flooding to Flood in Encapsulation.
Answer: C
NEW QUESTION 46
Refer to the exhibit.
Which Adjacency Type value should be set when the client endpoint and the service node interface are in a different subnet?
- A. Unicast
- B. Routed
- C. L3Out
- D. L3
Answer: B
NEW QUESTION 47
An engineer is configuring a VRF for a tenant named Cisco. Drag and drop the child objects on the left onto the correct containers on the right for this configuration.
Answer:
Explanation:
NEW QUESTION 48
A network administrator configures AAA inside the Cisco ACI fabric. The authentication goes through the local users if the TACACS+ server is not reachable. If the Cisco APIC is out of the cluster, the access must be granted through the fallback domain. Which configuration set meets these requirements?
- A. Ping Check: True
Default Authentication Realm: TACACS+
Fallback Check: False - B. Ping Check: False
Default Authentication Realm: Local
Fallback Check: False - C. Ping Check: False
Default Authentication Realm: TACACS+
Fallback Check: True - D. Ping Check: True
Default Authentication Realm: Local
Fallback Check: True
Answer: C
NEW QUESTION 49
The unicast routing feature is enabled on the bridge domain. Which two conditions enable the Cisco ACI leaf to learn a source IP as a local endpoint? (Choose two.)
- A. IP traffic routed through a Layer 3 Out.
- B. Through Ethernet traffic received in a bridge domain.
- C. Through VXLAN traffic received on the uplink.
- D. IP traffic routed through an SVI.
- E. Through ARP received on an SVI.
Answer: D,E
Explanation:
https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-739989.html
NEW QUESTION 50
An engineer needs to deploy a leaf access port policy group in ACI Fabric to support the following requirements:
* Control the amount of application data flowing into the system
* Allow the newly connected device to auto-negotiate link speed with the leaf switch Which two ACI policies must be configured to achieve these requirements? (Choose two.)
- A. L2 interface policy
- B. link level policy
- C. ingress control plane policing policy
- D. slow drain policy
- E. ingress data plane policing policy
Answer: B,E
Explanation:
Section: ACI Fabric Infrastructure
Explanation/Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/kb/ b_Cisco_ACI_and_Forward_Error_Correction.html
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/4-x/security/Cisco-APIC-Security- Configuration-Guide-401/b_Cisco_APIC_Security_Guide_chapter_01110.html#:~:text=Use%20data%20plane
%20policing%20(DPP,dropping%20of%20packets%20occurs%20immediately.
NEW QUESTION 51
Refer to the exhibit.
An engineer is integrating a VMware vCenter with Cisco ACI VMM domain configuration. ACI creates port-group names with the format of "Tenant | Application | EPG". Which configuration option is used to generate port groups with names formatted as "Tenant=Application=EPG"?
- A. enable tag collection
- B. virtual switch name
- C. security domains
- D. delimiter
Answer: D
NEW QUESTION 52
Which setting prevents the learning of Endpoint IP addresses whose subnet does not match the bridge domain subnet?
- A. "Limit IP learning to network" setting within the bridge domain.
- B. "Limit IP learning to subnet" setting within the bridge domain.
- C. "Limit IP learning to network" setting within the EPG.
- D. "Limit IP learning to subnet" setting within the EPG.
Answer: B
Explanation:
Section: ACI Packet Forwarding
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/L2_config/ b_Cisco_APIC_Layer_2_Configuration_Guide/ b_Cisco_APIC_Layer_2_Configuration_Guide_chapter_010.html
NEW QUESTION 53
A customer implements RBAC on a Cisco APIC using a Windows RADIUS server that is configured with network control policies. The APIC is as follows:
Tenant = TenantX
Security Domain = Tenantx-SD
User = X
The customer requires User X to have access to TenantX only, without any extra privilege in the Cisco ACI fabric domain. Which Cisco AV pair must be implemented on the RADIUS server to meet these requirement?
- A. shell:domains = TenantX-SD/tenant-admin/,common//read-all
- B. shell:domains = TenantX-SD/fabric-admin/,common//read-all
- C. shell:domains = TenantX-SD/tenant-admin
- D. shell:domains = TenantX-SD/tenant-ext-admin/,common//read-all
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/Security_config/b_Cisco_APIC_Security_Guide/b_Cisco_APIC_Security_Guide_chapter_0100.html
NEW QUESTION 54
Which routing protocol is supported between Cisco ACI spines and IPNs in a Cisco ACI Multi-Pod environment?
- A. BGP
- B. EIGRP
- C. ISIS
- D. OSPF
Answer: D
NEW QUESTION 55
An engineer must allow multiple external networks to communicate with internal ACI subnets. Which action should the engineer take to assign the prefix to the class ID of the external Endpoint Group?
- A. Configure subnets with the External Subnets for External EPG flag enabled.
- B. Enable an L30ut with Shared Route Control Subnet.
- C. Enable the Export Route Control Subnet for the External Endpoint Group flag.
- D. Configure subnets with the Import Route Control Subnet flag enabled.
Answer: A
NEW QUESTION 56
A network engineer must design a method to allow the Cisco ACI to redirect traffic to the firewalls. Only traffic that matches specific L4-L7 policy rules should be redirected. The load must be distributed across multiple firewalls to scale the performance horizontally. Which action must be taken to meet these requirements?
- A. Implement ACI Service Graph with GIPo.
- B. Configure ACI Service Graph with Symmetric PBR.
- C. Implement ACI Service Graph Two Nodes with GIPo.
- D. Configure ACI Service Graph with Unidirectional PBR.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-739971.html
NEW QUESTION 57
An engineer must connect a new host to port 1 on Leaf 101. A Cisco ACI fabric has an MOP policy configured but experience excessive Layer 2 loops The engineer wants the Cisco ACI fabric to detect and prevent Layer 2 loops m the fabric Which set of actions accomplishes these goals'?
- A. Option A
- B. Option C
- C. Option D
- D. Option B
Answer: D
NEW QUESTION 58
What do Pods use to allow Pod-to-Pod communication in a Cisco ACI Multi-Pod environment?
- A. over Layer 3 IPN connectivity via border leafs
- B. over Layer 3 directly connected back-to-back spines
- C. over Layer 3 IPN connectivity via spines
- D. over Layer 3 Out connectivity via border leafs
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-737855.html
NEW QUESTION 59
An engineer must deploy Cisco ACI across 10 geographically separated data centers. Which ACI site deployment feature enables the engineer to control which bridge domains contain Layer 2 flooding?
- A. Multi-Pod
- B. Multi-Site
- C. GOLF
- D. Stretched Fabric
Answer: B
NEW QUESTION 60
A Solutions Architect is asked to design two data centers based on Cisco ACI technology that can extend L2/ L3, VXLAN, and network policy across locations. ACI Multi-Pod has been selected. Which two requirements must be considered in this design? (Choose two.)
- A. ACI Multi-Pod does not support Firewall Clusters across Pods. Firewall Clusters should always be local.
- B. ACI underlay protocols, i.e. COOP, IS-IS and MP-BGP, spans across pods. Create QoS policies to make sure those protocols have higher priority.
- C. Multi-Pod requires multiple APIC Controller Clusters, one per pod. Make sure those clusters can communicate to each other through a highly available connection.
- D. ACI Multi-Pod requires an IP Network supporting PIM-Bidir.
- E. A single APIC Cluster is required in a Multi-Pod design. It is important to place the APIC Controllers in different locations in order to maximize redundancy and reliability.
Answer: B,C
NEW QUESTION 61
An engineer deploys a two-pod Cisco ACI Multi-Pod environment. Why should no more than two Cisco APIC controllers be deployed in the same pod?
- A. to avoid losing all replicas of a shard if a pod fails
- B. to avoid hair-pinning traffic that is destined for the primary APIC controller between pods
- C. to enable equal capacity to scale in each pod
- D. to ensure that all nodes in all pods have local access to a controller
Answer: C
NEW QUESTION 62
Refer to the exhibit.
A client reports that the ACI domain connectivity to the fiber channel storage is experiencing a B2B credit oversubscription. The environment has a SYSLOG server for state collection messages. Which value should be chosen to clear the critical fault?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 63
A data center administrator is upgrading an ACI fabric. There are 3 APIC controllers in the fabric and all the servers are dual-homed to pairs of leaf switches configured in VPC mode. How should the fabric be upgraded to minimize possible traffic impact during the upgrade?
- A. Option A
- B. Option C
- C. Option D
- D. Option B
Answer: A
NEW QUESTION 64
......
Get 2023 Updated Free Cisco 300-620 Exam Questions and Answer: https://www.testkingit.com/Cisco/latest-300-620-exam-dumps.html
300-620 Dumps PDF and Test Engine Exam Questions: https://drive.google.com/open?id=1GEIxWiEfZ3pHU593Qor28LH_l-fO7DrN