Juniper New 2023 JN0-635 Sample Questions Reliable JN0-635 Test Engine
Feel Juniper JN0-635 Dumps PDF Will likely be The best Option
Recertification Details
You can recertify for the JNCIP-SEC through testing by passing the relevant professional-level exam, by nailing the expert-level exam to advance the certification level, or by attending courses by Juniper Networks or any Juniper Networks Authorized Education Partners. If you pass an exam or take a course that is at a higher level than the certification you opt to recertify, you can renew all lower-level designations within that certification track. For example, if you recertify the expert-level JNCIE-SEC certification either through testing or by a course, you would have effectively recertified the lower-level security certificates including the JNCIP-SEC, JNCIS-SEC, and JNCIA-SEC. This recertification is valid for another three years from the time you passed the recertification exam or course. If you fail to recertify by the end of the active period, you will have to re-earn the certification from scratch.
Overview of JN0-635 Exam Content
There are various subject areas that you need to be skilled at before you can take the final JN0-635 exam:
- How Security Policy and Security Zone Troubleshooting works;
- Edge Security Features;
- Concepts of Layer 2 Security;
- Threat Mitigation Techniques;
- Tenant and Logical Systems;
- Application and Functions of Advanced IPsec.
NEW QUESTION 76
Click the Exhibit button.
The exhibit shows a snippet of a security flow trace. A user cannot open an SSH session to a server. Which action will solve the problem?
- A. Edit the source NAT to correct the translated address
- B. Create a route to the desired server
- C. Create a security policy that matches the traffic parameters
- D. Create a route entry to direct traffic into the configured tunnel
Answer: C
NEW QUESTION 77
Click the Exhibit button.
You are asked to look at a configuration that is designed to take all traffic with a specific source IP address and forward the traffic to a traffic analysis server for further evaluation. The configuration is not working as intended.
Referring to the exhibit, which change must be made to correct the configuration?
- A. Apply the filter as an output filter on interface xe-0/1/0.0
- B. Apply the filter as an input filter on interface xe-0/0/1.0
- C. Create a routing instance named default
- D. Apply the filter as an input filter on interface xe-0/2/1.0
Answer: B
NEW QUESTION 78
Click the Exhibit button.
You are implementing a new branch site and want to ensure Internet traffic is sent directly to your ISP and other traffic is sent to your company headquarters. You have configured filter-based forwarding to accomplish this objective. You verify proper functionality using the outputs shown in the exhibit.
Which two statements are true in this scenario? (Choose two.)
- A. The ge-0/0/5 and ge-0/0/1 interfaces must reside in a single security zone
- B. The session utilizes one routing instance
- C. The ge-0/0/5 and ge-0/0/1 interfaces can reside in different security zones
- D. The session utilizes two routing instances
Answer: B,C
NEW QUESTION 79
Click the Exhibit button.
Referring to the exhibit, what is the maximum number of zones that are able to be created within all logical systems?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 80
You have a webserver and a DNS server residing in the same internal DMZ subnet. The public Static NAT addresses for the servers are in the same subnet as the SRX Series devices internet-facing interface. You implement DNS doctoring to ensure remote users can access the webserver.Which two statements are true in this scenario? (Choose two.)
- A. The DNS CNAME record is translated.
- B. The DNS doctoring ALG is not enabled by default.
- C. The Proxy ARP feature must be configured.
- D. The DNS doctoring ALG is enabled by default.
Answer: C,D
NEW QUESTION 81
Your SRX Series device does not see the SYN packet.
What is the default action in this scenario?
- A. The device will drop the subsequent packets and the session will be established
- B. The device will forward the subsequent packets and the session will be established
- C. The device will drop the subsequent packets and the session will not be established
- D. The device will forward the subsequent packets and the session will not be established
Answer: C
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-tcp-session- checks.html
NEW QUESTION 82
Click the Exhibit button.
Which type of NAT is shown in the exhibit?
- A. persistent NAT
- B. NAT46
- C. DS-Lite
- D. NAT64
Answer: D
NEW QUESTION 83
According to the log shown in the exhibit, you notice the IPsec session is not establishing.
What is the reason for this behavior?
- A. Mismatched preshared key
- B. Mismatched peer ID
- C. Incorrect peer address.
- D. Mismatched proxy ID
Answer: B
Explanation:
Explanation
https://www.juniper.net/documentation/en_US/release-independent/nce/topics/example/policy-based-vpn-using-
NEW QUESTION 84
Your manager has notices a drop in productivity and believes it is due to employees checking their social media feeds too frequently. You are asked to provide analytical statistics for this traffic within your network on an hourly basis.
Which AppSecure feature should be used to collect this information?
- A. APBR
- B. AppQoS
- C. AppTrack
- D. AppFW
Answer: C
NEW QUESTION 85
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. Data is transmitted across the link in cyphertext
- B. The link is protected against man-in-the-middle attacks
- C. Data is transmitted across the link in plaintext
- D. The link is not protected against man-in-the-middle attacks
Answer: A,D
NEW QUESTION 86
Click the Exhibit button.
When attempting to enroll an SRX Series device to JATP, you receive the error shown in the exhibit. What is the cause of the error?
- A. The SRX Series device does not have an IP address assigned to the interface that accesses JATP
- B. The fxp0 IP address is not routable
- C. A firewall is blocking HTTPS on fxp0
- D. The SRX Series device certificate does not match the JATP certificate
Answer: A
NEW QUESTION 87
You must implement an IPsec VPN on an SRX Series device using PKI certificates for authentication. As part of the implementation, you are required to ensure that the certificate submission, renewal, and retrieval processes are handled automatically from the certificate authority.
In this scenario, which statement is correct.
- A. You can use SPKI to accomplish this behavior.
- B. You can use SCEP to accomplish this behavior.
- C. You can use OCSP to accomplish this behavior.
- D. You can use CRL to accomplish this behavior.
Answer: B
Explanation:
Certificate Renewal The renewal of certificates is much the same as initial certificate enrollment except you are just replacing an old certificate (about to expire) on the VPN device with a new certificate. As with the initial certificate request, only manual renewal is supported. SCEP can be used to re-enroll local certificates automatically before they expire. Refer to Appendix D for more details.
NEW QUESTION 88
What is the correct application mapping sequence when a user goes to Facebook for the first time through an SRX Series device?
- A. first packet > check application system cache > classify application > process packet > match and identify application
- B. first packet > check application system cache > process packet > classify application > match and identify application
- C. first packet > process packet > check application system cache > classify application > match and identify application
- D. first packet > process packet > check application system cache > classify application > process packet > match and identify application
Answer: B
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/concept/services-application- identification-techniques-understanding.html
NEW QUESTION 89
Malware that is detonated by the JATP sandbox must be able to communicate with the Internet without being able to harm your local network resources.
Which statement is correct in this scenario?
- A. The monitoring interface must be connected to the Internet zone
- B. The management interface must be connected to the Internet zone
- C. The honeypot interface must be connected to the Internet zone
- D. The exhaust interface must be connected to the Internet zone
Answer: B
Explanation:
https://www.juniper.net/documentation/en_US/release-independent/jatp/topics/topic-map/jatp- getting-started.html
NEW QUESTION 90
You are creating an IPS policy with multiple rules. You want traffic that matches rule 5 to silently be dropped, along with any future packets that match the appropriate attributes of the incoming traffic.
In this scenario, which ip-action parameter should you use?
- A. log-create
- B. ip-close
- C. timeout
- D. ip-block
Answer: D
NEW QUESTION 91
......
Use Valid New JN0-635 Test Notes & JN0-635 Valid Exam Guide: https://www.testkingit.com/Juniper/latest-JN0-635-exam-dumps.html