Free NS0-164 Braindumps Download Updated on Feb 03, 2026 with 250 Questions
Network Appliance NS0-164 Exam Practice Test Questions
NEW QUESTION # 145
An administrator wants to present datastores to a VMware environment that is using VLAN-10 and creates an SVM with NFS enabled on lif_NFS.
What does the administrator need to correct?
- A. Modify lif_MGMT to port eOf-10
- B. Modify lif_NFS to porte0f-10
- C. Enable the NFS option "-vstorage" on svmNFSl
- D. Change the Default broadcast domain MTU to 9000
Answer: B
NEW QUESTION # 146
The snapvault update command is only available on the secondary system.
- A. True
- B. False
Answer: A
NEW QUESTION # 147
Which two conditions would prevent an ONTAP upgrade? (Choose two.)
- A. Established iSCSI sessions
- B. Established NFS sessions
- C. Failed disk
- D. Offline LIF
- E. Offline volume
Answer: C,E
NEW QUESTION # 148
A NearStore system or storage appliance can operate as a secondary and primary system at the same time.
- A. True
- B. False
Answer: B
NEW QUESTION # 149
Which one of the following is not a pre-requisite for using SnapRestore?
- A. The volume to be reverted must be offline.
- B. Snapshots must exist on the storage appliance so that you can select a snapshot for the reversion.
- C. The volume to be reverted must not be a SnapMirror destination.
- D. You must enter the SnapRestore license code before you can use it.
Answer: A
NEW QUESTION # 150
Refer to the exhibit.
Based on the CPU headroom statistics provided for one node in the cluster, what is the available performance capacity?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 151
Which one of the following statements apply to Advanced Single Instance Storage (ASIS)?
- A. Eliminates duplicates files in SnapVault for NetBackup secondary volumes
- B. Eliminates duplicates blocks in SnapVaultfor NetBackup source volumes
- C. Eliminates duplicates blocks in SnapVault for NetBackup secondary volumes
- D. Eliminates duplicates files in SnapVaultfor NetBackup source volumes Correct answers
Answer: C
NEW QUESTION # 152
How would you initiate a cluster takeover of filer2 from filer 1?
- A. filerl> cf giveback
- B. filer2> cf takeover
- C. filer 1> cf takeover
- D. filer2> cf giveback
Answer: C
NEW QUESTION # 153
Identify the two SnapMirror commands that are entered on the destination storage appliance.
- A. snapmirror resync
- B. snapmirror release
- C. snapmirror initialize
- D. options snapmirror.access on
Answer: A,C
NEW QUESTION # 154
Which is true of the SnapVault backup of NetApp storage system?
- A. The file is the basic unit for SnapVault backup destination.
- B. The directory is the basic unit for SnapVault backup destination.
- C. The qtree is the basic unit for SnapVault backup destination
- D. The volume is the basic unit of SnapVault backup destination.
Answer: C
NEW QUESTION # 155
Which one of the following statements is true of storage appliance SnapVault backup?
- A. The volume is the basic unit of SnapVault backup.
- B. The directory is the basic unit for SnapVault backup.
- C. The qtree is the basic unit for SnapVault backup.
- D. The file is the basic unit for SnapVault backup.
Answer: C
NEW QUESTION # 156
Which two of the following NetApp storage appliances do not support the use of synchronous SnapMirror?
- A. F825
- B. F87
- C. FAS960
- D. F820
Answer: B,D
NEW QUESTION # 157
Which command disables client access to Snapshot copies on a volume called flexvol1?
- A. vol options flexvol1 nosnapdir on
- B. vol options flexvol1 snapdir off
- C. vol options flexvol1 snapdir on
- D. cifs shares-change flexvol1 -nosnap
- E. snap access flexvol1 off
Answer: A
NEW QUESTION # 158
Which three are required licenses for Fabric Attached MetroCluster? (Choose 3)
- A. Cluster
- B. Syncmirror_remote
- C. Syncmirrorocal
- D. Cluster remote
Answer: A,C,D
NEW QUESTION # 159
The required hardware to add SyncMirror to an existing Clustered Failover system consists of:
- A. Disk shelves and termination switches
- B. Disk shelves, adapters and cabling
- C. Disk shelves and cabling
- D. Disk shelves and cluster interconnect
Answer: B
NEW QUESTION # 160
Before enabling an active/active configuration, you should verify and compare the configuration of the nodes.
Which tool can perform this task?
- A. cf status command on both nodes
- B. cf-config-check.cgi script
- C. clustercheck script
- D. Release Comparison Tool
Answer: B
NEW QUESTION # 161
......
Updated Verified NS0-164 dumps Q&As - Pass Guarantee or Full Refund: https://www.testkingit.com/NetworkAppliance/latest-NS0-164-exam-dumps.html
Updated Certification Exam NS0-164 Dumps - Practice Test Questions: https://drive.google.com/open?id=13BYBP7uzyDDSk5ACSgGSxuEVQWRVGjUB