300-815 exam questions for practice in 2021 Updated 120 Questions
Updated Dec-2021 Premium 300-815 Exam Engine pdf - Download Free Updated 120 Questions
Overview of the Exam Outline
The content of 300-815 exam contains six domains, and questions taken from them will pop up during the test. However, they won't appear evenly, and some sections take up a larger portion of the syllabus than others. Take a look at them below:
- Cisco Unified Border Element
This section takes about 15% of the content. It covers the basic skills in handling the procedures involved setting up as well as troubleshooting the CU-BE dial plan components, including DTMF, voice translation rules and profiles, codec preference list, plus signaling and media bindings.
- Cisco Unified CM Call Control Features
This module takes about 20% of the syllabus. The subdomains include troubleshooting of the Call Admission Control and configuring ILS, URI synchronization, GDPR, hunt groups, call queuing, time of day routing, and supplementary roles.
- Call Control and Dial Planning
This domain has weight of about 25%. You are to have a general idea of troubleshooting and setting up the globalized call routing elements in CU-CM, such as the patterns for route, translation, transformation, and others.
- Mobility
About 10% of the exam questions come from this topic. To tackle these items, you must understand the concepts of setting up CU-CM mobility, including unified mobility, extension mobility, and device mobility, and troubleshooting them.
- Signaling and Media Protocols
This module covers about 20% of the test. It is required that you know how to troubleshoot the various elements of a SIP dialogue, including session timers, mid-call signaling, and more. You also need to equip yourself with a clear idea of troubleshooting certain protocol elements and media establishment.
- CME/SRST Gateway Technologies
About 10% of the questions come from this domain. It assesses one’s knowledge of how to configure CU-CME for SIP telephone registration and dial plans. Also, you should have a solid understanding of how to enforce toll fraud prevention and configure the advanced CU-CME features and SIP SRST gateway.
How to book the Cisco 300-815: Implementing Cisco Advanced Call Control and Mobility Services Exam
You must take the following procedures to take part in the Cisco IP Networks (300-815) Examination:
- Step 1: Click here for the Pearson VUE website
- Step 2: Sign in or establish an account
- Step 3: enter the examination number 300-135
- Step 4: Follow on-line directions
- Step 5: Taking 300-815 practice tests
- Step 6: Pay for examination with a credit card or examination voucher
NEW QUESTION 14
Where on Cisco Unified Communications Manager do you configure the standard local route group for a group of devices?
- A. System > Device Pool
- B. Call Routing > Emergency Location > Emergency Location (ELIN) Groups
- C. Call Routing > Route/Hunt > Local Route Group Names
- D. System > Location Info
Answer: C
NEW QUESTION 15
ABC company has decided to implement hunt groups to help distribute calls between members. In order to implement this, administrator must configure hunt list, hunt group, and line groups on Cisco UCM. Which distribution algorithms should the administrator implement?
- A. Top Down, Circular, Broadcast
- B. Top Down, Round Robin, Distribute
- C. Top Down, Round Robin, Broadcast
- D. Sequantial, Circular, Broadcast
Answer: A
NEW QUESTION 16
How does an engineer globalize routing for ingress calls coming from the PSTN to internal DNs?
- A. At Cisco Unified CM, put the calling number in E.164 format and the called number in PSTN format.
- B. At Cisco Unified Communications Manager, put the calling number in E.164 format and the called number in E.164 format.
- C. At the PSTN gateway, put the calling number in PSTN format and the called number in DN format.
- D. At the PSTN gateway, put the calling number in E.164 format and the called number in localized (DN) format.
Answer: A
NEW QUESTION 17
Which two statements are correct with respect to the Client Matter Code setting in the route pattern configuration? (Choose two.)
- A. The Client Matter Code feature does support overlap sending because the Cisco Unified Communications Manager can determine when to prompt the user for the code.
- B. The Client Matter Code has the option to configure Authorization Level such as in the Forced Authorization Code.
- C. If you check the Allow Overlap Sending check box, you can also check the Require Client Matter Code check box.
- D. If you check the Allow Overlap Sending check box, the Require Client Matter Code check box becomes disabled.
- E. The Client Matter Code feature does not support overlap sending because the Cisco Unified CM cannot determine when to prompt the user for the code.
Answer: D,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/ CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features- services-guide-100_chapter_010000.pdf
NEW QUESTION 18
Signal number reach call phone that not answered are leaving voicemails on the cell phone rather the corporate mailbox. Which two options will resolve this issue? (Choose two.)
- A. Decrease the T302 timer
- B. Check the Enable Unified Mobility features checkbox
- C. Check the Enable Extend and Connect checkbox
- D. Decrease the T301 timer Decrease the Answer Too Late timer
Answer: B,D
NEW QUESTION 19
An engineer must configure a secure SIP trunk with a remote provider, with a specific requirement to use port
5065 for inbound and otubound traffic. Which two items must be configured to complete this configuration?
(Choose two.)
- A. Destination Port in SIP Trunk Security Profile configuration
- B. Destination Port in SIP Information section of the SIP Trunk configuration
- C. Incoming Port in SIP Trunk Security Profile configuration
- D. Incoming Port in Security Information of the SIP Profile configuration.
- E. Incoming Port in SIP Information section of the SIP Trunk configuration.
Answer: B,C
Explanation:
Section: Call Control and Dial Planning
NEW QUESTION 20
When a third-party SIP Phone System is dialed inbound across a Cisco Unified Border Element, DTMF is failing. The third-party vendor accepts only out-of-band DTMF. Which configuration should be added to the outgoing dial peer to resolve this issue?
- A. dtmf-relay sip-kpml
- B. dtmf-relay cisco-rtp
- C. dtmf-relay h245-signal
- D. dtmf-relay rtp-nte
Answer: A
NEW QUESTION 21
Which two descriptions of the Standard Local Route Group deployment are true? (Choose two.)
- A. can be associated only under the route list
- B. chooses the route group that is configured under the device pool of the calling-party device
- C. can be associated under the route group
- D. chooses the route group that is configured under the device pool of the called-party device
- E. can be assigned directly to the route pattern
Answer: A,D
NEW QUESTION 22
Refer to the exhibit.
Users report that when they dial the emergency number 9911 from any internal phone, it takes a long time to connect with the emergency operator. Which action resolves this issue?
- A. Check the Urgent Priority check box under 9.911 pattern.
- B. Point the emergency pattern directly to the PSTN gateway.
- C. Adjust the service parameter T302 timet to the desired value.
- D. Adjust the service parameter T204 timer to the desired value.
Answer: A
NEW QUESTION 23
Refer to the exhibit.
A user reports that when they call a specific phone number, no one answers the call, but when they call from a mobile phone, the call is answered. The engineer troubleshooting the issue is expecting the far-end gateway to cut through audio on the 183 Session Progress SIP message. Which SIP Profile configuration element is necessary for the Cisco Unified Communications Manager to send acknowledgement of provisional responses?
- A. Allow Passthrough of Configured Line Device Caller Information must be enabled.
- B. Early Offer for G Clear Calls must be enabled.
- C. Accept Audio Codec Preferences in Received Offer must be set to On.
- D. On the SIP Profile, the configuration parameter SIP Rel1XX Options must be set to Send PRACK for all 1xx Messages.
Answer: D
NEW QUESTION 24
Which IOS command creates a SIP-enabled dial peer?
- A. dial-peer voice 20 pots
- B. dial peer voice 20 sip
- C. voice dial-peer 20 sip
- D. dial-peer voice 20 voip
Answer: D
Explanation:
Reference:
https://www.ciscopress.com/articles/article.asp?p=664148&seqNum=6
NEW QUESTION 25
An IP Telephony administrator is deploying IP phones The administrator has an existing Cisco UCME router with several SCCP & SIP phones registered. The administrator receives a request for a new SIP phone with MAC address 1111 2222.3333 and directory number 2050 to be added in the Cisco UCME. Which two configurations should be added in CME to support this request? (Choose two )
- A. Option D
- B. Option B
- C. Option A
- D. Option E
- E. Option C
Answer: A,E
NEW QUESTION 26
Calls to a particular extension are not routing to voicemail. The user reaches the voicemail system from the handset by pressing the Messages button Which configuration parameter causes this problem?
- A. The voicemail pilot number is missing from the call handling on Cisco Unity Express
- B. The voicemail pilot number for call forwarding is missing from the ephone-dn
- C. The voicemail pilot number is missing from the telephony service configuration on Cisco UCME
- D. The voicemail pilot number for call forwarding is missing from the ephone
Answer: B
NEW QUESTION 27
Refer to the exhibit.
The Cisco Unified Border Element receives an INVITE matching inbound dial peer 5002. The outbound dial peer supports only iLBC. and a Local Transcoding Interface is allocated. Based on the configuration and SDP from the INVITE message, which codec is chosen by Cisco Unified Border Element for the inbound call leg?
- A. G.729r8
- B. G.729br8
- C. G.711 A-law
- D. G.711 U-law
Answer: A
NEW QUESTION 28
The administrator of ABC company is troubleshooting a one-way audio issue for a call that uses H.323 protocol (slow-start mode). The administrator requests that you provide the IP and port information of the Real- Time Transport Protocol traffic that had the one-way audio call.
You gather the H.225 and H.245 messages for one of the one-way audio calls. Where can you find the RTP IP and port information for both sides? (Note: This call flow has not invoked any media resources like MTP or transcoders).
- A. H.245 Open Logical Channel
- B. H.245 Terminal Capability Set
- C. H.245 Open Logical Channel Ack
- D. H.225 Connect
Answer: A
Explanation:
Reference:
http://ccievoicehopeful.blogspot.com/2012/09/h323-notes.html
NEW QUESTION 29
Which configuration element of a hunt group allows for changing Calling Party Transformations settings?
- A. route group
- B. hunt pilot
- C. line group
- D. hunt list
Answer: B
NEW QUESTION 30
When configuring hunt groups, where do you add the individual directory numbers that will be part of the group?
- A. route group
- B. hunt pilot
- C. line group
- D. hunt list
Answer: C
Explanation:
Section: Cisco Unified CM Call Control Features
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_0_1/systemConfig/ cucm_b_system-configuration-guide-1201/cucm_b_system-configuration-guide-1201_chapter_010101.html
NEW QUESTION 31
Configure Call Queuing in Cisco Unified Communications Manager. Where do you set the maximum number of callers in the queue?
- A. in the queuing configuration
- B. in the telephony service configuration
- C. in Cisco Unified CM Service Parameters
- D. in Cisco Unified CM Enterprise Parameters
Answer: A
NEW QUESTION 32
An engineer is troubleshooting Cisco Device Mobility and find that the phone has roamed to a building that is assigned to a different device pool but has not changed its device pool accordingly What action resolves the issue?
- A. Enable SRST under Current Device Mobility Settings
- B. Set Device CSS under Current Device Mobility Settings.
- C. Set correct Location under Current Device Mobility Settings
- D. Set the correct subnet under Device Mobility Info.
Answer: D
NEW QUESTION 33
Refer to the exhibit.
An engineer is troubleshooting an issue with the caller not hearing a PSTN announcement before the SIP call has completed setup. How must the engineer resolve this issue using the reliable provisional response of the SIP?
- A. voice service voip sip send 180 sdp
- B. voice service voip sip no reMxx
- C. voice service voip sip rehxx require 100rel
- D. sip-ua
disable-early-media 180
Answer: C
NEW QUESTION 34
What is a component of Cisco Unified Mobility?
- A. Mobile Connect
- B. Smart Client Support
- C. Unified IVR
- D. Single Number Connect
Answer: A
NEW QUESTION 35
Which call pickup feature allows users to pick up incoming calls in a group that is associated with their own group?
- A. Directed Call Pickup
- B. Other Group Pickup
- C. Group Call Pickup
- D. BLF Call Pickup
Answer: B
Explanation:
Section: Cisco Unified CM Call Control Features
Explanation/Reference: https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_1_3/ccmsys/ a07cpick.html#wp1022865
NEW QUESTION 36
A user in location X dials an extension at location Y.
The call travels through a QoS-enabled WAN network, but the user experiences choppy or clipped audio. What is the cause of this issue?
- A. codec mismatch
- B. ptime mismatch
- C. phone class of service issue
- D. missing Call Admission Control
Answer: A
NEW QUESTION 37
Refer to the exhibit.
Which change to the translation rule is needed to strip only the leading 9 from the digit string 9123548?
- A. rulel /.*\(3548S\)/^1/
- B. rule 1 /^9\(.*\)/A1/
- C. rulel /^9\(\d*\)/^1/
- D. rule 1/^9123548/^1/
Answer: B
NEW QUESTION 38
An engineer is configuring Cisco UCM lo forward parked calls back to the user who parked the call if it is not retrieved after a specified time interval. Which action must be taken to accomplish this task?
- A. Configure device pools.
- B. Configure class of control.
- C. Configure enterprise softkeys.
- D. Configure service parameters
Answer: D
NEW QUESTION 39
......
What is the duration, language, and format of Cisco 300-815: Implementing Cisco Advanced Call Control and Mobility Services Exam
- Format: Multiple selection
- Exam duration: 90 minutes
- Applicability: 3 years
- Exam language: English
Authentic 300-815 Dumps With 100% Passing Rate Practice Tests Dumps: https://www.testkingit.com/Cisco/latest-300-815-exam-dumps.html
Cisco 300-815 Real Exam Questions Guaranteed Updated Dump from TestKingsIT : https://drive.google.com/open?id=1tDsYnQ3_A2d8nnewAqOZJnSWqNq2de9H