2025 Hybrid-Cloud-Observability-Network-Monitoring Dumps PDF - Hybrid-Cloud-Observability-Network-Monitoring Real Exam Questions Answers
Valid Hybrid-Cloud-Observability-Network-Monitoring Test Answers & SolarWinds Hybrid-Cloud-Observability-Network-Monitoring Exam PDF
NEW QUESTION # 29
Which port allows log analysis in the SolarWinds platform to accept secure syslog messages?
- A. UDP port 514
- B. UDP port 10514
- C. TCP port 6514
- D. TCP port 601
Answer: C
NEW QUESTION # 30
Which application classification system is used with deep packet inspection technologies to provide better visibility into network traffic and is a mechanism used by certain Cisco routers/switches to recognize dataflow by inspecting some of the packets sent?
- A. flow navigator
- B. NBAR2 applications
- C. CBQoS drops
- D. autonomous systems
Answer: B
Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
NBAR2 (Next Generation Network-Based Application Recognition) is Cisco's deep packet inspection technology used to classify network traffic at the application layer. It provides visibility by inspecting packet payloads, not just ports, and is supported in SolarWinds for advanced application recognition.
SolarWinds documentation states:
"NBAR2 allows supported Cisco devices to classify traffic by application using deep packet inspection. This provides detailed application visibility within SolarWinds network monitoring solutions." References:
Network Performance Monitor Administrator Guide, "NBAR2 and Application Classification" SolarWinds Success Center: "Using NBAR2 with NetFlow"
NEW QUESTION # 31
To drill down into a log summary for a specific node, where in SolarWinds' platform can a user view these logs?
- A. Node Details Summary > Management > List Resources
- B. My Dashboard > Logs > Log Viewer
- C. Node Details Summary > Management > Analyze Logs
- D. Alerts & Activity > Message Center
Answer: C
NEW QUESTION # 32
If an SNMP community string is changed on a device, which two of the following steps are required to re-establish successful polling on the node? (Choose two.)
- A. Delete and add the node back into the platform.
- B. Restart the SNMP service on the source device.
- C. Edit the node properties and save the changes.
- D. Update the community string in node properties.
Answer: C,D
NEW QUESTION # 33
Which two of the following requirements are needed to set up network devices and export NetFlow data?
(Choose two.)
- A. The interface through which a device exports NetFlow data must be monitored in NPM.
- B. Each device that exports NetFlow data to SolarWinds' NTA must be monitored in NCM.
- C. Each device that exports NetFlow data to SolarWinds' NTA must be monitored in NPM.
- D. Each device can be optionally configured to export NetFlow data to SolarWinds' NTA.
Answer: A,C
Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
To properly collect and display NetFlow data in SolarWinds NTA, the following requirements must be met:
C). Each device that exports NetFlow data to SolarWinds' NTA must be monitored in NPM.
NTA (NetFlow Traffic Analyzer) relies on devices being monitored by NPM (Network Performance Monitor) to collect and correlate flow data.
D). The interface through which a device exports NetFlow data must be monitored in NPM.
Only interfaces that are managed in NPM can be used for NetFlow data collection, visualization, and reporting.
Devices do not need to be monitored in NCM (Network Configuration Manager) for NetFlow, and exporting NetFlow is not optional if you want the device's flows displayed in NTA.
References:
NTA Administrator Guide: Requirements for NetFlow Monitoring
NEW QUESTION # 34
Which two of the following tasks must be accomplished to monitor servers and connections in a load-balancing environment? (Choose two.)
- A. add Cisco Nexus device in network device configuration manager
- B. enable CLI polling
- C. add Cisco Nexus device in network health / performance monitoring
- D. enable F5 iControl polling
Answer: C,D
NEW QUESTION # 35
An agent is deployed to the Windows server in order to monitor logs, however logs are not coming in from the related agent. It is confirmed that the agent software is deployed and installed on the target machine.
What additional setting needs to be checked?
- A. log forwarding feature is enabled
- B. polling method is set to agent
- C. polling method is set to WMI
- D. correct rule to read logs is configured
Answer: D
NEW QUESTION # 36
Probing interval determines how often and how long information is polled from the network path. Which two of the following statements are true regarding probing intervals? (Choose two.)
- A. probing more frequently allows the data to update faster but decreases data accuracy
- B. probing less frequently allows the data to update faster but decreases data accuracy
- C. probing less frequently allows the data to update more slowly and increases data accuracy
- D. probing more frequently allows the data to update more slowly and increases data accuracy
Answer: A,C
NEW QUESTION # 37
Which two of the following locations can hardware health be enabled? (Choose two.)
- A. manage MIB
- B. asset inventory
- C. main settings
- D. list resources
Answer: B,D
Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
Hardware health monitoring can be enabled during node discovery or after a node is added via the "List Resources" option. Additionally, hardware health can be enabled or viewed in the Asset Inventory page for nodes that support it.
From the documentation:
"You can enable hardware health sensors by selecting the option during resource discovery (List Resources) or later via Asset Inventory for individual nodes." References:
NPM Administrator Guide: Enabling Hardware Health
NEW QUESTION # 38
A node has been added to hybrid cloud observability and shows an "unknown" status until the data is polled.
The default interval for polling status is two minutes.
If the node stays in the "unknown" status longer than the polling interval, which three of the following steps can be performed to resolve the issue? (Choose three.)
- A. Verify the appropriate polling method is set for this node.
- B. Run SNMP walk on the appropriate node.
- C. Verify a pingresponsefor this node is received through the ICMP.
- D. Ping device from assigned polling engine.
Answer: A,C,D
NEW QUESTION # 39
A network router node using ICMP polling has a green status icon and shows basic information (i.e., status) but is not showing more detailed statistics. What might resolve this issue?
- A. Edit the node properties to verify proper polling credentials.
- B. Unmanage and re-manage the node.
- C. Run ping tests to verify communication.
- D. Switch polling to SNMP to gather additional polling statistics.
Answer: D
Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
ICMP polling in SolarWinds only provides basic status (up/down) by sending ping requests to the device. For more detailed statistics such as interface traffic, CPU load, and memory usage, SNMP polling must be enabled. The documentation states:
"ICMP polling provides only basic reachability and response time. To collect detailed statistics such as device health, performance, and interface details, SNMP polling must be configured on the device and enabled in SolarWinds." References:
Network Performance Monitor Administrator Guide, "Polling Methods and Statistics Collection" SolarWinds Success Center: "SNMP vs ICMP Polling"
NEW QUESTION # 40
What is the unit of data used for alerting on flows?
- A. bPs
- B. gps
- C. mbps
- D. ms
Answer: A
NEW QUESTION # 41
Which two of the following data sources can be used for polling devices in device studio? (Choose two.)
- A. night and day standard deviation of calculated value
- B. predicted value from OID baseline
- C. calculated result from transformation of polled values
- D. polled value by a device on an object ID
Answer: C,D
NEW QUESTION # 42
Which custom poller can display the poller results as a chart, gauge, or table?
- A. network insight
- B. device studio poller
- C. hardware health
- D. universal device poller (UnDP)
Answer: D
Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
The Universal Device Poller (UnDP) in SolarWinds allows you to create custom SNMP pollers. Results from UnDPs can be displayed as charts, gauges, or tables on SolarWinds web console views. The administrator guide states:
"Universal Device Pollers (UnDPs) allow you to collect SNMP data not provided natively by SolarWinds.
The collected results can be displayed as charts, gauges, or tables, making it easier to visualize the custom metrics." Device Studio pollers are templates used to define UnDPs, but it is the UnDP that presents data visually.
Hardware health and Network Insight are not custom pollers.
References:
NPM Administrator Guide: Universal Device Pollers - Displaying Poller Results
NEW QUESTION # 43
Which two of the following Windows versions are supported for log collection in hybrid cloud observability?
(Choose two.)
- A. Windows server 2019
- B. Windows Vista
- C. Windows 10
- D. Windows server 2012
Answer: A,C
NEW QUESTION # 44
Which status rollup mode displays groups defined as collections of redundant or backup devices?
- A. showzero
- B. show best
- C. show worst
- D. show mixed
Answer: B
NEW QUESTION # 45
Which two of the following components are required to successfully create a NetPath probe? (Choose two.)
- A. Windows agent
- B. Linux agent
- C. connection port
- D. source IP address
Answer: A,C
Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
To create a NetPath probe in SolarWinds, you need to specify a source (which requires a Windows-based agent or node) and a destination port. The documentation states:
"To deploy a NetPath probe, select a Windows node or agent as the source and specify the connection port for the service to be monitored. Linux nodes and agents are not supported for NetPath probes." References:
NPM Administrator Guide: Creating and Deploying NetPath Probes
NEW QUESTION # 46
......
Hybrid-Cloud-Observability-Network-Monitoring Exam Dumps - PDF Questions and Testing Engine: https://www.testkingit.com/SolarWinds/latest-Hybrid-Cloud-Observability-Network-Monitoring-exam-dumps.html
Realistic Hybrid-Cloud-Observability-Network-Monitoring Exam Dumps with Accurate & Updated Questions: https://drive.google.com/open?id=1gEcfhx4n9fLjsB8us5w3TK2enq09Ebrj