2024 Updated Verified 1z0-1066-23 dumps Q&As - Pass Guarantee or Full Refund
1z0-1066-23 PDF Questions and Testing Engine With 111 Questions
NEW QUESTION # 35
In which situation would Bills of Distribution be more effective than Sourcing Rules?
- A. When Organization A buys from a Supplier; Organization B transfers from Organization A, and Organization C transfers from Organization B
- B. When Organization A, Organization B, and Organization C transfer from Organization C
- C. When Organization A, Organization B, and Organization C make their own products
- D. When all organizations are buying from a single outside supplier
- E. When all organizations transfer 50% of the material from Organization B, and 50% from Organization C
Answer: A
NEW QUESTION # 36
Your client wants to exclude all of the inventory from the 'Reject' subinventory from only one of their supply plans. What action must be taken to meet this requirement?
- A. Manage Subinventories > Choose a material status in which 'Nettable' is unchecked
- B. It is not possible to exclude one subinventory from a particular supply plan.
- C. Manage Subinventories > Search and select subinventory > Deselect 'Nettable'
- D. Manage Plans > Search and select supply plans > 'Organizations and Schedules' tab > 'Organizations' > 'Subinventory Netting' > Deselect 'Reject' subinventory for each organization
- E. Manage Plans > Search and select supply plans > 'Organizations and Schedules' tab > 'Supply Schedules' > 'Subinventory Netting' > Deselect 'Reject' subinventory for each organization
Answer: D
NEW QUESTION # 37
Your customer wants to display a numeric measure in both pound and kilogram Units of Measure (UOM) on a table. Describe the configuration steps to display a measure in two UOMs.
- A. Open a table and select View, Format Measures to find the measure. Duplicate the measure and rename it. Now select pound as UOM for the original measure and kilogram as UOM for the duplicated measure.
- B. Open a table and select Actions, View Table Configuration and click Measure tab. Find the measure, duplicate the measure, and rename it. Now select pound as UOM for the original measure and kilogram as UOM for the duplicated measure.
- C. Open a table and select Actions, View Table Configuration and click UOM tab. Select primary UOM as pound and secondary UOM as kilogram.
- D. Open a table and select View, Format Measures to find the measure. Now select pound as primary UOM and kilogram as secondary UOM.
Answer: D
NEW QUESTION # 38
Which list of parameters is available for selection when you run the Start Backlog Planning scheduled process?
- A. Backlog Priority Rule. Organization. Category. Item. Customer
- B. Priority Rule. Organization. Demand Class, Item. Customer
- C. Demand Priority Rule. Organization. Demand Class. Item. Customer
- D. Demand Priority Rule. Organization. Category. Item, Customer
Answer: D
NEW QUESTION # 39
When planning for customer demand to be fulfilled from internal organizations or from a contract manufacturer, what are the four types of planned orders that can be generated? (Choose four.)
- A. Buy orders for components purchased at internal organizations and contract manufacturer organizations.
- B. Transfer orders for internally owned components being transferred from internal organizations to contract manufacturer organizations.
- C. Make orders for items being manufactured in the contract manufacturer organization.
- D. Transfer orders for internally owned components being transferred from contract manufacturer to internal organizations.
- E. Return orders for items being manufactured in the contract manufacturer organization.
- F. Transfer orders for finished goods being transferred from contract manufacturer organizations to internal organizations.
Answer: A,B,C,F
Explanation:
NEW QUESTION # 40
Which is the correct sequence of possible solutions that a constrained plan might consider when attempting to resolve a capacity or resource overload?
- A. First alternate suppliers, then alternate resources, then substitute components, then alternate work definitions and item structures, and finally, alternate source organizations.
- B. First alternate item structures, and work definitions, then substitute components, then alternate resources, and finally, alternate suppliers and source organizations.
- C. First alternate resources, then substitute components, then alternate work definitions and item structures, and finally, alternate suppliers and source organizations.
- D. First subscribe components, then alternate resources, then alternate work definitions and item structures, and finally, alternate suppliers and source organizations.
Answer: C
NEW QUESTION # 41
Which calendar is supported in the supply planning process but does not support bucketing by week?
- A. Fiscal
- B. Lunisolar
- C. Roman
- D. Gregorian
- E. Julian
Answer: E
Explanation:
NEW QUESTION # 42
Which KPIs are available to measure forecasting accuracy and specify how these measures aggregated from item-organization level to higher levels.
- A. MAPE, MFE, and Bias are used to measure forecast accuracy. MAPE and Bias are aggregated using weighted average. MFE is aggregated using sum.
- B. MAPE, MFE, and Bias are used to measure forecast accuracy. MAPE and MFE are aggregated using weighted average. Bias is aggregated using sum.
- C. MAPE, MAD, and Bias are used to measure forecast accuracy. MAPE and Bias are aggregated using weighted average. MAD is aggregated using sum.
- D. MAPE, MAD, and Bias are used to measure forecast accuracy. MAD and Bias are aggregated using sum. MAPE is aggregated using weighted average.
Answer: D
NEW QUESTION # 43
When analyzing demand fulfillment, what are the three types of recommendations that users can review and accept for expediting? (Choose three.)
- A. Expedite buy orders
- B. Expedite transfer orders
- C. Expedite make orders
- D. Expedite make to stock orders
- E. Expedite drop ship orders
Answer: A,B,C
NEW QUESTION # 44
During Implementation of Planning Central, your client has discovered that no Material Planners have been defined in Manage Material Planners in Planning Central.
In this situation, which three statements are true? (Choose three.)
- A. Your client has not been assigned the Material Planner role.
- B. The Planner field will be null for all items.
- C. Collect Planning Data has not been run for Material Planners.
- D. You have not been assigned the Materials Planner role.
- E. Planned Orders will not release successfully.
Answer: A,B,E
NEW QUESTION # 45
Another planner has previously created a supply plan, but you now need to make some changes so that you can do some 'what-if' analysis. How can you go about duplicating this plan?
- A. You cannot duplicate plans. You must create a completely new supply plan.
- B. Run process "Duplicate supply plans" with existing plan as parameter.
- C. Manage Plans > Search and select supply plan > Actions > Duplicate.
- D. You cannot duplicate a plan that is not owned by you.
- E. Manage Plans > Search and select supply plan > Actions > Edit Plan Options > Select Copy.
Answer: C
NEW QUESTION # 46
Each of your planners is responsible for a different geography and set of product lines, so each planner needs to see just their own set of data, analyses and dashboards.
How do you configure the application so each planner can have their own custom dashboard viewable only to themselves?
- A. Create private page layouts that are tailored to specific business needs.
- B. You cannot create custom dashboards by user.
- C. Enable layout security checkbox in the Administer Planning Security
- D. Create public page layouts that are tailored to specific business needs.
Answer: A
NEW QUESTION # 47
You want to be able to filter your data by the planner code attribute on the item. Where can you go to do this?
- A. The process "Associate Measure Catalog Attributes" must be run to associate new attributes.
- B. Configure Planning Analytics > Measure Catalog
- C. Configure Planning Analytics > Levels and Attributes tab
- D. The process "Add Levels and Attributes" must be run to associate new attributes.
- E. Enable planner code on Planning Analytics page.
Answer: E
NEW QUESTION # 48
Your client has a requirement to restrict Supply Plan data access. Identify three Data Access Set detail entities that can be used to restrict plan data access. (Choose three.)
- A. Transaction Type
- B. Item
- C. Demand Class
- D. Supplier
- E. Customer
- F. Material Planner
Answer: B,D,E
Explanation:
NEW QUESTION # 49
Which statement applies only to the planning of back-to-back items and not standard items?
- A. Planning collects bookings or shipments history to forecast items.
- B. Planning pegs reserved supplies to sales orders.
- C. Planning analyzes supply shortages and capacity overloads using any of the standard planning tools.
- D. Must have added sourcing rules to the Global Order Promising assignment set.
- E. Must use Global Order Promising and Supply Chain Orchestration to release and create new supplies
Answer: E
Explanation:
NEW QUESTION # 50
......
Oracle 1z0-1066-23 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
Exam Engine for 1z0-1066-23 Exam Free Demo & 365 Day Updates: https://www.testkingit.com/Oracle/latest-1z0-1066-23-exam-dumps.html
Test Engine to Practice Test for 1z0-1066-23 Valid and Updated Dumps: https://drive.google.com/open?id=1BoP1ePGlD6EtN9XY7wrMikRvMEP0dIAj