2023 Latest NS0-516 dumps - Instant Download PDF
Updated Verified NS0-516 Downloadable Printable Exam Dumps
NetApp NS0-516 Exam Certification Details:
| Exam Name | Implementation Engineer SAN Specialist E-Series |
| Passing Score | 75% |
| Recommended Training | E-Series Fundamentals (WBT) Configuring and Monitoring NetApp E-Series and EF-Series Storage Systems (ILT) |
| Number of Questions | 60 |
| Duration | 90 minutes |
| Exam Code | NS0-516 NCIE SAN Specialist E-Series |
| Sample Questions | NetApp NS0-516 Sample Questions |
NEW QUESTION 23
A customer has an E5760 array with a 30-drive dynamic disk Pool (DDP) that uses 800 GB SSD drives.
The customer needs to expand the pool by one drive but has only a 1.6 TB SSD drive available.
In this scenario, what happens when the customer attempts to add the 1.6 TB drive to the existing pool?
- A. The pool is expanded by 1.6 TiB
- B. The pool is expanded by 1.6 T
- C. The pool is expanded by 800 GB
- D. Online Proctored Whiteboard
Answer: C
NEW QUESTION 24
Where can you enter scripts in the SANtricity user interface?
- A. In the AMW on the Setup tab
- B. In the EMW on the Setup tab
- C. In the EMW on the Devices tab
- D. In the AMW on the Storage & Copy Services tab
Answer: C
NEW QUESTION 25
What should you do to confirm a component failure prior to replacing hardware? (Choose the best answer.)
- A. Run chkdsk on the client
- B. Check the Major Events Log
- C. Power cycle the storage array
- D. Run the Recovery Guru
Answer: D
NEW QUESTION 26
You are adding drives to an existing Dynamic Disk Pool (DDP).
In this scenario, which two drive characteristics should you consider when selecting the drives? (Choose two.)
- A. if the drives have the same firmware level
- B. if the drives are from the same manufacturer
- C. if the drives are the same capacity or larger
- D. if the drives have a compatible security type
Answer: C,D
NEW QUESTION 27
A company wants the most scalable host-side connection topology for E-Series systems.
In this scenario, which FC topology would satisfy the requirement?
- A. arbitrated loop
- B. fabric attach
- C. private loop
- D. direct connect
Answer: B
NEW QUESTION 28
When a drive fails in a Dynamic Disk Pool (DDP) with no free capacity, what happens to the data?
- A. It is rebuilt using preservation capacity within the DD
- B. It is evacuated to a hot spare drive that is assigned to the DD
- C. It is evacuated to the preservation capacity within the DD
- D. It is rebuilt using the on-board backup database
Answer: A
NEW QUESTION 29
The out-of-band connection is an Ethernet connection from the storage manager host to the LAN, and from the LAN to which location?
- A. port E of the controller
- B. port 1 of the I/O host
- C. port 1 of the controller
- D. port 2 of the ESM
Answer: C
NEW QUESTION 30
The Netapp E-Series system with a 32 Gb FC Host Interface Card (HIC) requires which type of fiber cable to connect to switches or to connect directly to hosts extending up to 100 meters?
- A. OM2
- B. OM1
- C. OM4
- D. OM3
Answer: D
NEW QUESTION 31
Which three documents should be provided to the customer after the e-Series installation is complete?
(choose three.)
- A. a document showing how much space is available for system expansion
- B. a document showing available power on the UPS with no equipment connected
- C. a document showing the cabinet layout with cabling information and IP addresses being used
- D. a b a document with IMT pages that show the supported host configuration and fabric switches in the solution
- E. a document showing user IDs and passwords for all deployed devices
Answer: C,D,E
NEW QUESTION 32
Which three connection types would be used between the host and the storage array in a switched environment? (Choose three.) Note: Answers to this question are not verified by our experts, please study yourself and select the appropriate answers.
Contribute: Please send the correct answers with reference text/link on [email protected] to get up to 50% cashback.
- A. direct attach
- B. Fibre Channel
- C. InfiniBand
- D. Ethernet
- E. USB-C
Answer: B,C,E
NEW QUESTION 33
What is the minimum number of drives needed to create a Dynamic Disk Pool?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 34
What does the storage system use to preserve cache data in the event of a complete controller failure? (Choose the best answer.)
- A. Write caching
- B. Cache mirroring
- C. Read caching
- D. Pre-fetch caching
- E. Flash read cache
Answer: B
NEW QUESTION 35
Which command will display which Brocade switches are connected into a fabric?
- A. fabricshow
- B. show fabric
- C. switchshow
- D. configshow
Answer: A
NEW QUESTION 36
What is the proper order to power-on E-Series arrays when a storage system has at least 2 trays? (Choose the best answer.)
- A. Power all expansion drive trays first, wait several minutes for the expansion drive trays to spin up, and then power on the controller drive tray
- B. Power on the controller drive tray first, then wait several minutes for the controller drive tray to spin up, and then power on all expansion drive trays
- C. Power on in any order, since the order does not matter
- D. Power up A-side power supplies first, then power up all B-side power supplies.
Answer: B
NEW QUESTION 37
The decision to use FC or iSCSI on the 5500 Controller with a 4-port 16Gb/s FC or 10Gb/s iSCSI Optical SFP+ HIC (Host Interface Card) can be ___________. (Choose the best answer.)
- A. ignored because both can be used at the same time
- B. based upon the SFP type
- C. changed at any time by SANtricity
- D. set at the factory, based on the order
Answer: B
NEW QUESTION 38
Which scenario is allowed for mirroring between sites?
- A. FDE enabled on the primary volume and disabled on the secondary volume
- B. Data Assurance enabled on the primary volume and enabled on the secondary volume
- C. Data Assurance disabled on the primary volume and enabled on the secondary volume
- D. FDE disabled on the primary volume and enabled on the secondary volume
Answer: B
NEW QUESTION 39
Based on this partitioning configuration, what volumes can Host Group Z "see"? (Volumes are color-coded for parti ions.)
- A. E, F, H
- B. A, B, C
- C. B, C, G
- D. F, G, H
Answer: C
NEW QUESTION 40
You have two Linux hosts that must be connected over multiple paths to two NetApp E-Series systems. One with FC and the other with SAS.
In this scenario, which mutipathing driver should you use for each system to complete this task?
- A. Use LVM for FC and SAS.
- B. Use DM-MP for SAS and LVM for FC.
- C. Use DM-MP for FC and SAS.
- D. Use DM-MP for FC and LVM for SAS.
Answer: C
NEW QUESTION 41
Exhibit:
Referring to the exhibit, what is the total number of ALUA paths from the host to a volume on the EF280?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 42
Consult the ___________ to determine the current link status of a host port. (Choose the best answer.)
- A. Recovery Guru
- B. Unreadable Sectorslog
- C. Storage Array Profile
- D. Real-time performance monitor
Answer: C
NEW QUESTION 43
During normal operation, a failure was detected on an E-Series hardware component. You want to determine the location of the failed component and understand the potential recovery actions.
In this scenario, which tool would you use to accomplish this task?
- A. Recovery Guru
- B. unreadable sectors log
- C. Host Mappings tab
- D. performance monitor
Answer: A
NEW QUESTION 44
An administrator is asked to provision a 1 TB volume to hold non-critical temporary data for a seismic-analysis application. The volume requires the highest possible IOPS.
In this scenario, which configuration would satisfy this requirement?
- A. RAID 6 Dynamic Disk Pool with a 32 KiB segment size
- B. RAID 6 Dynamic Disk Pool with a 256 KiB segment size
- C. RAID 5 volume group with a 256 KiB segment size
- D. RAID 0 volume group with a 32 KiB segment size
Answer: C
NEW QUESTION 45
Click the Exhibit button.
You ordered a NetApp E2812 Duplex 16GB 10 GbE Base-T system.
Referring to the exhibit, what is the maximum number of 10GbE Base-T ports available to be used?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 46
Which file contains the configuration for a multipath driver for FC on Linux systems?
- A. /etc/multipath.conf
- B. /etc/dm-multipath.conf
- C. /opt/multipath/multipath.cnf
- D. /etc/kernel/mp.conf
Answer: A
NEW QUESTION 47
......
NetApp NS0-516 Exam Topics:
| Section | Objectives |
|---|---|
| Protection | -Describe how Data Assurance with media scan protects your data. - Describe SANtricity data protection features. |
| Management | -Describe the administrative tasks for managing E-Series systems with SANtricity System Manager. -Describe the management security features in SANtricity System Manager and SANtricity Unified Manager. -Describe when and how to configure and use SANtricity Unified Manager. |
| Troubleshooting | -Demonstrate the steps for troubleshooting an E-Series system. -Demonstrate how to analyze multipathing issues between a host and an E-Series system. |
| SAN | -Describe the end-to-end network configuration for Fibre Channel and Ethernet. |
| Host Side | -Describe the different host connection options for E-Series systems. -Describe how to configure hosts for multipathing. |
| Documentation | -Describe the process of reviewing and preparing a site for implementation of E-Series. -Describe the information you give a customer after deploying a solution. |
| Storage Configuration | -Describe how to setup alerting and notification for the E-Series system. -Describe how to create and administer Volume Groups or DDP and associated volumes. -Describe physical and logical storage requirements. -Describe the setup of CHAP for an iSCSI environment. -Describe when to use DDP or Volume Groups. |
| Hardware | -Describe the hardware components in an E-Series storage system. -Describe Fibre Channel, Ethernet, Infiniband and SAS cabling. -Describe the appropriate tasks for adding additional storage to an E-Series system. -Describe drive encryption features. |
The Ultimate Network Appliance NS0-516 Dumps PDF Review: https://www.testkingit.com/NetworkAppliance/latest-NS0-516-exam-dumps.html
Achieve The Utmost Performance In NS0-516 Exam Pass Guaranteed: https://drive.google.com/open?id=1Ml-oRIrGveCu3VQ1Eu8a868etTKVJziX