100% Pass Top-selling HPE0-J68 Exams - New 2021 HP Pratice Exam
HPE ASE Dumps HPE0-J68 Exam for Full Questions - Exam Study Guide
NEW QUESTION 29
A customer needs to upgrade their HPE storage environment, including driver and firmware levels and OS, to the latest version.
Where can you find the needed information about supported versions?
- A. HPE Storage Assessment Foundry
- B. HPE OneView
- C. HPE SAN Design Reference Guide
- D. HPE SPOCK
Answer: D
NEW QUESTION 30
What owns the physical drives in an HPE 3PAR StoreServ Express Layout?
- A. a chunklet
- B. a single node
- C. a logical disk
- D. a node pair
Answer: D
NEW QUESTION 31
During a proof-of-concept you need to implement an inter-switch-link (ISL)between two HPE SN6000B switches. Which port mode must be set enable communication between the switches?
- A. F_PORT
- B. FL_PORT (WRONG)
- C. E_PORT (Correct)
- D. N_PORT
Answer: C
NEW QUESTION 32
What is used to migrate data between nodes in an HPE StoreVirtual VSA environment?
- A. Remote Copy
- B. Network RAID
- C. Peer Motion
- D. SmartClone
Answer: C
Explanation:
Integrated with HPE Recovery Manager Central for seamless data movement to StoreOnce Backup appliances and StoreOnce VSA, and bidirectional replication with 3PAR StoreServ arrays (Peer Copy).
NEW QUESTION 33
Which management interface uses four basic commands (Create ,read, update ad delete )to enable administrators to define ad radically simply management processes?
- A. WEBEM
- B. SMI-S
- C. Rest API
- D. WMI
Answer: C
NEW QUESTION 34
During Technology workshop ,the customer asks about different between converged and fibre channel switches. What would be a benefits of using flex fabric switches in a fibre channel storage environment?
- A. Zones can be configured for QoS with high ,medium, and low priorities within a fabric on a zone by zone basic
- B. Support for six Ethernet and two fibre channel ,or six Ethernet and two ISCSI or eight Ethernet adapters per server.
- C. Support for combining multiple physical switches in to one virtual switch with a single IP address
- D. In-flight compression and encryption provides efficient link utilization and security
Answer: C
NEW QUESTION 35
Which functionality available in an HPE 3 Par StoreServ 8400 system that is not available in an HPE 3par Storesrve 7200
- A. Persistent Checksum end-to-end data integrity (correct)
- B. Online import license
- C. Data at Rest Encryption
- D. Adaptive optimization and dynamic Optimization
Answer: A
NEW QUESTION 36
Which feature enables a non-disruptive environment where host-based multi-pathing software is not affected in the event of a firmware upgrade?
- A. HPE 3PAR Persistent Cache
- B. HPE 3PAR Access Guard
- C. HPE 3PAR MPIO
- D. HPE 3PAR Persistent Ports
Answer: D
NEW QUESTION 37
A customer needs to add another HPE 3PAR StoreServ system and plans to use the federated storage approach.
Which advantages can the customer expect? (Choose two.)
- A. federated deduplication
- B. allows multiple management tools
- C. load balancing
- D. reduced power, cooling, and environmental impacts
- E. easier migration
Answer: C,E
Explanation:
Federated storage-Move data between storage systems in a peer-to-peer relationship simply, dynamically, and nondisruptively to improve storage utilization, balance workloads, and ease storage migration.
NEW QUESTION 38
You are planning a single-site Nimble solution with iSCSI connectivity. Two 10GbE SFP+ dual port NICs are included in the configuration. You designed an Intelligent Resilient Framework (IRF) stack with HPE FlexFabric 5900CP switches.
Which statement is correct when discussing the IRF limits for this configuration?
- A. The used IRF ports for iSCSI traffic have to be configured as 10GbE converged ports.
- B. When connecting an iSCSI storage to an IRF stack, a minimum of four 10GbE ports must be used per switch.
- C. A maximum of two switches can be used in an IRF stack when connecting storage.
- D. In an IRF stack with storage connectivity, the 40GbE ports cannot be used.
Answer: B
NEW QUESTION 39
Which type of networking switch handles both Ethernet and fibre channel traffic?
- A. Virtual
- B. Edge
- C. Converged
- D. Director
Answer: C
NEW QUESTION 40
During which event will HPE 3par Storeserv persistent port feature provide transparent and uninterrupted failover (Select two)
- A. Loss of full-mesh cluster interconnect
- B. B-series SAN switch upgrades
- C. Loss of persistent cache
- D. Node maintenance or failure
- E. Firmware upgrade
Answer: D,E
NEW QUESTION 41
Which statement is correct when discussing the RAID layout of an HPE Nimble HF-series storage system?
- A. RAID 6 or RAID 1 can be set up -18 data drives are used for RAID stripes.
- B. RAID 6 or RAID 1 can be set up -24 data drives are used for RAID stripes.
- C. RAID 6 triple parity is set up -21 data drives are used for RAID stripes.
- D. RAID 6 triple parity is set up -18 data drives are used for RAID stripes.
Answer: C
NEW QUESTION 42
A customer has a SAN based on HPE B-series switches with Gen6 fibre channel technology. Their workload is continually growing and they are experiencing performance issues. They need a solution to enable real-time monitoring and to speed up troubleshooting in his SAN backend.
Which unique feature of the HPE B-series Gen6 switches should you recommend? (Choose two.)
- A. Advanced Trunking
- B. MAPS
- C. Extended Fabrics
- D. Fabric Vision
- E. Fabric Watch
Answer: D,E
NEW QUESTION 43
Which technology is used in a B-series SAN switch to prevent communicate between unauthorized device?
- A. VSAN
- B. Zoning
- C. Port isolation
- D. IVR
Answer: C
NEW QUESTION 44
You have just completed a performance analysis of an HPE 3PAR StoreServ 8400 disk array with different tiers at a customer's site. After reviewing the performance metrics, you determine that they should install a new tier of SSD drives.
Which actions should you recommend they take to fully optimize the array? (Choose two.)
- A. Configure Adaptive Flash Cache.
- B. Configure dedicated drives to enable Adaptive Flash Cache.
- C. Rebalance all flash drives between nodes 0 and 2.
- D. Configure scheduled tunesys tasks.
- E. Configure Adaptive Optimization.
Answer: D,E
NEW QUESTION 45
A customer currently has a CS1000H and wants to upgrade to a CS3000.
What must be considered before upgrading?
- A. A controller upgrade to a CS1000F has to be performed first.
- B. This upgrade is disruptive and needs planned downtime.
- C. A capacity upgrade to a fully populated array has to be performed first.
- D. Timeless storage support is not offered for CS1000H entry-level systems.
Answer: C
NEW QUESTION 46
Match the type of storage found in today's market to the HPE storage solution optimized for that capacity?
- A. Nimble - Block
- B. StoreVirtual - Block
- C. MSA - Block
- D. Scalability - Object
- E. StoreEasy - File
- F. HPE 3PAR StoreServ - Block
Answer: F
NEW QUESTION 47
Which statement is correct when comparing functionalities of the AF,CF, and SF series in the nimble storage portfolio?
- A. Inline deduplication for complete array capacity in combination with compression is offered by the AF and SF series only (67) need to check
- B. SF series supports storage snapshots and replication using veeeam backup & replication CS and AF series support storage snapshot only.
- C. 99.9999% availability measured and guaranteed for AF and CF series arrays, SF series array offer 99.999% availability.
- D. Zero copy clone are unique feature of all flash array within the nimble portfolio
Answer: A
NEW QUESTION 48
Which built-in HPE 3PAR StoreServ technology reduces database transaction logs response time?
- A. Express Writes
- B. Thin Deduplication
- C. Adaptive Flash Cache
- D. Thin provisioning
Answer: C
NEW QUESTION 49
While demonstrating an HPE 3PAR StoreServ 9450 array, the customer asks you to demonstrate the File Persona features.
Which objects do you need to create to demonstrate these features? (Choose two.)
- A. File share
- B. Storage container
- C. Host
- D. Virtual file server
- E. Remote copy group
Answer: A,D
NEW QUESTION 50
Users are complaining about poor performance with their Data Warehouse application.
What is an effective solution to increase their performance at minimal cost?
- A. HPE 3PAR Adaptive Flash Cache
- B. HPE 3PAR Dynamic Optimization
- C. HPE 3PAR Priority Optimization
- D. HPE 3PAR Adaptive Optimization
Answer: C
NEW QUESTION 51
Which storage protocol is supported by virtual connect Flex-10?
- A. FC
- B. FCoE
- C. FCIP
- D. ISCSI
Answer: D
NEW QUESTION 52
What has to taken into account when performing capacity planning for HPE Nimble storage using deduplication?
- A. Deduplication is performed on a per volume basic
- B. Deduplication is performed on a per array basic
- C. Deduplication is performed on a per pool and block size basic
- D. Deduplication is performed on a per application category basic
Answer: C
NEW QUESTION 53
A customer has a large amount of the data on their Primera that is mission critical. The business needs RPO to be under 5 minutes.
Which protection technology should you recommend?
- A. backup to tape
- B. synchronous replication
- C. archiving
- D. asynchronous replication
Answer: B
NEW QUESTION 54
......
Authentic Best resources for HPE0-J68 Online Practice Exam: https://www.testkingit.com/HP/latest-HPE0-J68-exam-dumps.html
HPE0-J68 Test Engine Practice Exam: https://drive.google.com/open?id=1geZB0S_KICdpnCtB5hlJnoXmawFGUU9I