100% Free Real Updated NCM-MCI-5.15 Questions & Answers Pass Your Exam Easily
Easily To Pass New NCM-MCI-5.15 Verified & Correct Answers
NEW QUESTION 39
Refer to the exhibit.
User 1 and User 2 belong to the AAPM group
What are two descriptions of how Files perform quota management? (Choose two.)
- A. User 2 can add an 8GB file without receiving a notification email.
- B. User 1 can continue to add another 5GB file but will receive a daily notification email.
- C. User 1 can add an 8GB file to the share without receiving notification.
- D. User 2 can continue to add another 3GB file but will receive a daily notification email.
Answer: A,B
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/details?targetId=Files-v3_6:fil-file-server-quotas-c.html#nconcept_a
NEW QUESTION 40
A VM is exhibiting one or more of the following baseline values based on the past 30 days:
* CPU usage < 20%
* CPU ready time < 5%
* Memory usage < 50% (moderately) or < 20% (severely)
* Memory swap rate = 0 Kbps
Which type of VM is being described?
- A. Over-Provisioned VM
- B. Constrained VM
- C. Inactive VM
- D. Bully VM
Answer: A
Explanation:
NEW QUESTION 41
Refer to the exhibit.
An administrator configures Active Directory authentication as shown in the exhibit. Upon finishing setup, users are not able to log in.
What configuration change should be made to fix this issue?
- A. Change the Directory URL to use an IP rather than a name
- B. Change leaps to https
- C. Change the plct from 389 to 636
D Change the Domain to use an IP rather than a name
Answer: C
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v510:mul-security-auth
NEW QUESTION 42
A customer recently set up Async Replication between Site A and Site B. The customer wants to conduct a planned failover and clicks Activate on Site B.
The customer then runs the following command on Site A:
ncli pd deactivate_and__destroy_vms name=<protection_domain_name>
What does this do to the customer environment?
- A. Customer must then manually power off VMs at Site A and power them on at Site B.
- B. VMs get deleted from Site A and the protection domain is no longer active.
- C. VMs are powered off on Site A and must be manually powered on at Site B.
- D. VMs get deleted from Site B. and the protection domain is now Active.
Answer: B
Explanation:
Explanation
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_10:wc-protection-d
NEW QUESTION 43
An administrator receives an error indicating that the CVMs in the cluster are not syncing to any NTP servers. An investigation of the issue finds:
* The NTP servers are configured in Prism
* The time on all CVMs is the same
* Both the CVMs and AHV hosts are configured for the UTC time zone
Which two steps can be taken to troubleshoot this issue? (Choose two.)
- A. Restart genesis on all CVMs.
- B. On a CVM. run the command a Hash ntpq -pn.
- C. Confirm that the NTP servers are reachable from the CVMs.
- D. Restart the chronos service on all CVMs.
Answer: B,C
Explanation:
Explanation
Ref: https://portal.nutanix.com/page/documents/kbs/details?targetId=kA032000000bmjeCAA#Review_ntpq
NEW QUESTION 44
An administrator needs to make sure an RF3 cluster can survive a failure of two complete racks without negatively affecting performance. The current cluster configuration consists of the following:
* 30 All Flash Nodes: distributed 10 nodes per rack across three 42U racks
* Each node is configured with 20TB usable storage all flash (Cluster Total 600TB Usable)
* Current cluster utilization is 500TB storage
* Storage containers have Erasure Coding enabled
Which configuration changes should be made to make sure the cluster meets the requirements?
- A. Expand the cluster to 40 nodes distributed evenly across 5 racks
- B. Expand the cluster to 48 nodes distributed evenly across 6 racks
- C. Expand the cluster to 50 nodes distributed evenly across 5 racks
- D. Expand the cluster to 60 nodes distributed evenly across 6 racks
Answer: D
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_17:arc-configure-fau
NEW QUESTION 45
An administrator is configuring an All Flash cluster to support the following workloads:
* Full clone virtual desktops
* Hadoop
* Write heavy databases
Which three correct configuration options should the administrator use to meet the item requirements?
(Choose three.)
For each procedure, indicate whether it is a correct or incorrect procedure that must be configured to meet the item requirements using the drop-down option.
Answer:
Explanation:
Explanation
Ref:
NEW QUESTION 46
An administrator has a 32-node hybrid cluster with CPU, RAM and storage utilization of 80%. A database VM is configured with VM Flash.
What is causing this IO latency?
- A. Controller VM is experiencing high CPU ready time.
- B. Curator scans causes by ILM constantly moving data.
- C. Database VM is experiencing high CPU ready time.
- D. VM Flash Mode reduces SSD tier capacity for VMs.
Answer: A
NEW QUESTION 47
An administrator is responsible for the following Nutanix Enterprise Cloud environment:
* A central datacenter with a 20-node cluster with 1.5PB of storage
* Five remote sites each with a 4-node cluster with 200TB storage
The remote sites are connected to the datacenter via 1GB links with an average latency of 6 ms RTT. What is the minimum RPO the administrator can achieve for this environment?
- A. 15 minutes
- B. 1 hour
- C. 0 minutes
- D. 6 hours
Answer: B
Explanation:
Explanation
Ref:
https://support-portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_10:wc-prote
NEW QUESTION 48
Refer to the exhibit.
After performing ESXi to AHV conversion on a cluster, the alerts shown in the exhibit display on Prism. What should the administrator do to resolve this issue efficiently?
- A. Remove the VMs. create a new Protection Domain, and add VMs to it
- B. Create a new Protection Domain and add the VMs to rt.
- C. Remove VMs from the Protection Domain and add them back in.
- D. Delete the Protection Domain, create a new Protection Domain, and add the VMs to it
Answer: C
NEW QUESTION 49
An administrator is concerned that Prism will be inaccessible if Active Directory is unable to process logins.
Which method should the administrator use to access the cluster in the event of this type of outage?
- A. Manage the cluster remotely by downloading ncli to a remote workstation
- B. Create and use an emergency local account on the cluster
- C. Deploy an Active Directory server locally on the cluster
- D. Manage the cluster by using the "nutanix" user on the Prism leader CVM
Answer: B
NEW QUESTION 50
An administrator of a Nutanix Enterprise Cloud has microsegmentation enabled and a firewall VM installed.
The security team notifies the administrator that one of the VMs hosted in the environment has been exhibiting suspect network activity. The administrator wants to isolate the VM from the production network, but must still be able to access it to perform diagnostics.
What should the administrator do to meet the requirement?
- A. Disable the vNIC on the affected VM
- B. Quarantine the VM using the Forensic Method
- C. Create a security policy with a service chain directing that VMs traffic to the firewall VM
- D. Create a firewall rule that blocks VM traffic but permits diagnostic access
Answer: C
Explanation:
Explanation
Ref https://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000LIelCAG
NEW QUESTION 51
An administrator needs to deploy an application with a large amount of data connected via Nutanix Volumes.
Which two actions should the administrator take when designing the Volume Group? (Choose two.)
- A. Distribute workload across multiple virtual disks
- B. Use multiple subnets for iSCSI traffic
- C. Enable RSS (Receive Side Scaling)
- D. Enable thick provisioning on the Volume Group(s)
Answer: A,C
Explanation:
NEW QUESTION 52
An administrator knows that the disks in a cluster are out of date and a new firmware is available. For security reasons, these clusters do not have access to the Internet.
Which two steps must be completed to update the firmware? (Choose two.)
- A. Download the updated firmware .tgz file from the Nutanix portal.
- B. Configure LCM with a URL to access the firmware bundle.
- C. Select Upgrade Software, then select disks and upload the updated firmware.
- D. Download a dark site bundle and stage it on an internal webserver.
Answer: A,C
NEW QUESTION 53
An administrator is implementing a VDI solution. The workload will be a series of persistent desktops in a dedicated storage container within a four-node cluster. Storage optimizations should be set on the dedicated storage container to give optimal performance including during a node failure event.
Which storage optimizations should the administrator set to meet the requirements?
- A. Deduplication and Erasure Coding
- B. Compression only
- C. Compression, Deduplication, and Erasure Coding
- D. Compression and Deduplication
Answer: A
Explanation:
Explanation
Ref:
NEW QUESTION 54
Refer to the exhibit.
An administrator is commissioning a Nutanix Enterprise Cloud. Once the user VMs have been deployed and are running, the administrator finds that VMs on the same host are able to communicate, but are unable to communicate between hosts.
What must be changed to enable full inter-VM communications?
- A. Change the spanning-tree port type on the switch
- B. The VMs need to have static IP addresses
- C. Change the network the VMs are connected to
- D. Update the switch to specifically allow VLAN 15
Answer: D
Explanation:
Explanation
Ref: https://hyperhci.com/2019/11/09/nutanix-ahv-enable-vlan-trunk-mode-on-guest-vm/
NEW QUESTION 55
An administrator receives reports about a Nutanix environment. The investigation finds the following;
* VMs are experiencing very high latency
* Each node is equipped with a single SSD, utilized at 95%
* Each node is equipped with three HDDs, utilized at 40%
Why are the guest VMs experiencing high latency?
- A. All VM read operations are coming from HDD.
- B. All VM write operations are going to HDD.
- C. CVMs are overwhelmed by disk balancing operations.
- D. VMs are unable to perform write operations.
Answer: B
Explanation:
Explanation
Ref:
https://next.nutanix.com/prism-infrastructure-management-26/disk-space-usage-high-alert-in-prism-38199
NEW QUESTION 56
A VM is exhibiting one or more of the following baseline values based on the past 30 days:
* CPU usage < 20%
* CPU ready time < 5%
* Memory usage < 50% (moderately) or < 20% (severely)
* Memory swap rate = 0 Kbps
Which type of VM is being described?
- A. Over-Provisioned VM
- B. Constrained VM
- C. Inactive VM
- D. Bully VM
Answer: A
Explanation:
NEW QUESTION 57
Over the period of 2 to 3 weeks, a cluster displays the following:
*Periods where Warning Alerts of memory usage over 75% are asserted
*Periods where Critical Warnings of memory usage over 90% are asserted
*Periods of slow of frozen VDI desktops have caused work stoppage or slowdown
*VDI clones have periodically not powered up when called, causing work stoppage Which steps should be used to prioritize the administrator's troubleshooting efforts?
- A. *Analyze Alert Pages for a root cause of memory problem
*Analyze VM table page to access the VM functionality
*Analyze the VDI Clone properties for possible VDI Workload stress - B. *Check Analysis page for CPU demand
*Verify VDI workload property for memory subscription
*Review the Hardware page to determine if the cluster has sufficient RAM - C. *Review Analysis Page for memory use pattern
*Alert with VDI workload demand
*Analyze current and future workload in the Capacity Runaway tab for sufficient resources - D. *Assess resource health on Hardware page
*Review the Analysis page for memory usage demand
*Determine the VDI workload-to-host affinity across the cluster
Answer: C
NEW QUESTION 58
Refer to the exhibit.
What is the purpose of eth2 on the CVMs?
- A. iSCSI connectivity
- B. Remote site connectivity
- C. RDMA Network Segmentation
- D. Network Segmentation
Answer: C
Explanation:
Explanation
Ref: https://next.nutanix.com/installation-configuration-23/backplane-network-in-aos-5-5-27291
NEW QUESTION 59
Refer to the exhibit.
An administrator creates a security policy that isolates their financial application from accessing the Internet When viewing the policy in Prism Central, several connections from the application are outbound to the Internet.
What is causing this issue with the policy?
- A. The 0.0.0.0 address was not specified in the outbound rule.
- B. The Activate box was not checked in the rule, so it is not enforcing.
- C. The policy has been left in monitor mode instead of enforcing mode.
- D. The blocked connections are illustrated for information only.
Answer: C
Explanation:
Explanation
https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v510:mul-security-poli
NEW QUESTION 60
An administrator is trying to correct high cluster IOPs and Cluster Controller Latency. Networking is the suspected issue.
Which networking parameters should be configured in the Nutanix cluster?
- A. Bond State and network latency
- B. Number of NICs connected and bond state.
- C. Number of NICs connected and frame size
- D. Number of NICs connected and network latency.
Answer: C
NEW QUESTION 61
In a Nutanix cluster, a Protection Domain contains 50 entities that are replicated to a remote Single Node Replication Target.
The current schedule configuration is as follows:
* Repeat every 6 hours
* Local Retention Policy 1
* Remote Retention Policy 8
* Starting time 12 am
At 8 am on Monday, the administrator discovers that a protected VM is corrupted. The latest good state was Sunday 2 pm. The administrator needs to maintain current protection.
Which strategy should the administrator use to meet these requirements?
- A. From the Remote site, activate the Protection Domain, then re-protect the entity.
- B. From the Remote site, restore the VM from the local snapshot by selecting the correct snapshot
- C. From the local site, retrieve the correct remote snapshot, then restore the VM locally.
- D. From the local site, restore the VM from the local snapshot by selecting the correct snapshot.
Answer: C
NEW QUESTION 62
......
Free NCM-MCI-5.15 Exam Files Downloaded Instantly: https://www.testkingit.com/Nutanix/latest-NCM-MCI-5.15-exam-dumps.html